Documents referencing 1910.335

A to Z Index | En español | Contact Us | FAQs | About OSHA

QuickTakes

Print this Page

Print This Page

Decrease Text Size

Increase Text Size


	What's New \| Offices
Home Workers Regulations Enforcement Data & Statistics Training Publications Newsroom Small Business

Federal Registers

#
1	1990 - 11/01/1990 - Corrections to Final Rule on Electrical Safety-Related Work Practices - 55:46052
2	1990 - 08/06/1990 - Electrical Safety-Related Work Practices Final Rule - 55:31984-32020
3	1988 - 06/09/1988 - Electrical Safety-Related Work Practices - 53:21694-6

Standard Interpretations

#
1	2010 - 05/18/2010 - Whether use of personal protective equipment is mandatory when working under heat stress conditions.
2	2006 - 07/28/2006 - Clarification about 29 CFR 1910.333 and 29 CFR 1910.147 as they relate to work inside an electrical panel and on related equipment.
3	2003 - 07/25/2003 - Relevance of NFPA 70E industry consensus standard to OSHA requirements; whether OSHA requirements apply to owners.
4	1996 - 05/20/1996 - Letter requesting interpretation of the OSHA electrical standards as they apply to employees using insulated hand tools.
5	1992 - 04/28/1992 - Minimally acceptable levels of illumination; Resistor banks on overhead cranes; Overhead lines; Protective gloves on energized equipment.
6	1991 - 12/27/1991 - Use of general protective equipment and tools by employees when working near exposed energized conductors or circuit parts in the workplace.
7	1990 - 09/07/1990 - Applicability of the new Electrical Safety final rule, Subpart S, to the construction industry

Regulations (Standards - 29 CFR)

#
1	1910.335 - Safeguards for personnel protection.