Documents referencing 1910.147(a)(2)(ii)

A to Z Index | En español | Contact Us | FAQs | About OSHA

QuickTakes

Print this Page

Print This Page

Decrease Text Size

Increase Text Size


	What's New \| Offices
Home Workers Regulations Enforcement Data & Statistics Training Publications Newsroom Small Business

Standard Interpretations

#
1	2008 - 01/25/2008 - Use of a PLC system as an alternative measure which provides effective protection for minor servicing activities.
2	2007 - 05/04/2007 - Lockout/Tagout and the provisions for testing or positioning of machines while they are energized.
3	2007 - 02/26/2007 - Evaluation of the ElectroGuard disconnect system for use as an energy isolating device.
4	2006 - 12/28/2006 - Application of the Lockout/Tagout standard to die-setting activities and other machine setup operations.
5	2006 - 01/18/2006 - Interlock requirements for access door(s) of trash compactor.
6	2005 - 08/24/2005 - Lockout/tagout requirements for servicing manually-controlled vertical/horizontal milling machine and drill press tool changes.
7	2005 - 04/22/2005 - Lock out/Tag out (LOTO) requirements for die-setting operations in hydraulic power presses.
8	2004 - 04/07/2004 - Printing Industry: Lock Out/Tag Out and the essential elements of the inch-safe-service technique.
9	1999 - 12/16/1999 - Use of Monitored Power Systems for lockout/tagout.

Regulations (Standards - 29 CFR)

#
1	1910.147 - The control of hazardous energy (lockout/tagout).