Documents referencing 1910.253

A to Z Index | En español | Contact Us | FAQs | About OSHA

QuickTakes

Print this Page

Print This Page

Decrease Text Size

Increase Text Size


	What's New \| Offices
Home Workers Regulations Enforcement Data & Statistics Training Publications Newsroom Small Business

Federal Registers

#
1	2009 - 11/10/2009 - Revising Standards Referenced in the Acetylene Standard - 74:57883-57884
2	1990 - 06/20/1990 - Welding, Cutting and Brazing; Technical Amendments to Final Rule - 55:25093-94

Standard Interpretations

#
1	2006 - 08/30/2006 - Use of the BoaGripTM sling to move compressed-gas cylinders in general industry.
2	2006 - 05/12/2006 - Use of the "Regulator Umbrella" for "in use" or "connected for use" conditions for portable compressed gas cylinders.
3	2006 - 05/10/2006 - Storage of oxygen and acetylene cylinders for construction vs. general industry.
4	2006 - 05/08/2006 - General industry and construction standards regarding "in use" or "ready to use" and "storage" of compressed gas and oxygen cylinders for welding; §1910.253(b)(2)-1910.253(b)(4) and §1926.350(a)(10).
5	1993 - 09/09/1993 - Movement of compressed gas cylinders with regulators installed and "special truck" requirement.
6	1992 - 04/20/1992 - Temporary storage carrier for oxygen and acetylene cylinders.
7	1992 - 02/06/1992 - Maintaining Workplace Acetylene Cylinders.
8	1992 - 01/28/1992 - Flashback Arrestors and Backflow Protective Equipment for Welding Operations.

Regulations (Standards - 29 CFR)

#
1	1910.253 - Oxygen-fuel gas welding and cutting.