Documents referencing 1926.32

A to Z Index | En español | Contact Us | FAQs | About OSHA

QuickTakes

Print this Page

Print This Page

Decrease Text Size

Increase Text Size


	What's New \| Offices
Home Workers Regulations Enforcement Data & Statistics Training Publications Newsroom Small Business

Federal Registers

#
1	2013 - 03/21/2013 - Kiewit Power Constructors Co. et al.; Application for a Permanent Variance and Request for Comments - 78: 17432-17448
2	1971 - 08/17/1971 - Definitions - 36:15533

Standard Interpretations

#
1	2004 - 02/09/2004 - Requirements for load-testing and marking of special custom-design rigging accessories; applicability of ASME standards.
2	2001 - 12/11/2001 - Guarding requirements for a rotary pneumatic angle-drive hand-held tool.
3	1995 - 08/31/1995 - Clarification of the OSHA standard 1926.32 addressing competent persons at construction sites.
4	1994 - 08/11/1994 - Construction vs. Maintenance.
5	1993 - 12/01/1993 - Keller ladder proper set up.
6	1993 - 02/01/1993 - Inspection of cranes used at a construction site.
7	1992 - 10/23/1992 - Certification of aerial lift operators.
8	1992 - 04/16/1992 - Rear fly extension ladders manufactured by Keller Industries.
9	1992 - 04/15/1992 - Rules addressing competent persons and qualified persons.
10	1991 - 12/06/1991 - Use of crane or derrick suspended personnel platforms accessing a worksite.
11	1989 - 07/19/1989 - Clarification of the term "approved".
12	1986 - 02/21/1986 - Clarification of Competent and Qualified Person, as it Relates to Subpart P.

Regulations (Standards - 29 CFR)

#
1	1926.32 - Definitions.