The provisions of this section shall apply to ship repairing and shipbuilding operations and shall not
apply to shipbreaking.
When employees are working in the vicinity of flush manholes and other small openings of comparable
size in the deck and other working surfaces, such openings shall be suitably covered or guarded to a height of not less than 30 inches, except where
the use of such guards is made impracticable by the work actually in progress.
When employees are working around open hatches not protected by coamings to a height of 24 inches or
around other large openings, the edge of the opening shall be guarded in the working area to height of 36 to 42 inches, except where the use of such
guards is made impracticable by the work actually in progress.
When employees are exposed to unguarded edges of decks, platforms, flats, and similar flat surfaces,
more than 5 feet above a solid surface, the edges shall be guarded by adequate guardrails meeting the requirements of 1915.71(j)(1) and (2), unless
the nature of the work in progress or the physical conditions prohibit the use or installation of such guardrails.
When employees are working near the unguarded edges of decks of vessels afloat, they shall be protected by personal flotation devices, meeting the requirements of § 1915.158(a).
Sections of bilges from which floor plates or gratings have been removed shall be guarded by guardrails
except where they would interfere with work in progress. If these open sections are in a walkway at least two 10-inch planks placed side by side, or
equivalent, shall be laid across the opening to provide a safe walking surface.
Gratings, walkways, and catwalks, from which sections or ladders have been removed, shall be barricaded
with adequate guardrails.
[67 FR 44542, July 3, 2002]