Newsletter
RSS Feeds
Print This Page
Text Size
Standard Interpretations - Table of Contents |
| • Standard Number: | 1910.27 |
|
April 15, 1977
Mr. E. Robert Obus Dear Mr. Obus: It has been brought to our attention that our letter of February 16, 1977 on the subject of Safety Climb Systems for tower and tank ladders was insufficiently detailed. The first statement in our previous letter was "OSHA has taken the position that climbing ladders are required on all towers and tanks as well as all other vertical surfaces that are intended to be scaled." This was in response to your letter where question 1 mentioned towers not provided with a ladder or pegs, but where cross members were-used to ascend or descend. To clarify the intent of our statement, we would like to add the following qualification. Scaling structural members of any tower, tank, or other structure is recognized as a hazardous practice and has resulted in several deaths due to slip and fall or loss of grip in the course of climbing. Because of this situation, OSHA may cite either 1910.27 on fixed ladders where ladders or pegs fail to meet OSHA standards or OSHA may cite the general duty clause of Public Law 91-596, Section 5(a)(1) on the basis that climbing structural members is a known and recognized hazard. Further, the use of pegs precludes the use of a ladder safety device or fixed ladder cages; thereby precluding the possibility of meeting OSHA standards for fixed ladders. We hope the preceding explanation will remove any doubts about the application of OSHA standards on towers and tanks and clarify our intended description. Sincerely,
Alfred Barden |
|
Standard Interpretations - Table of Contents |