Standard Interpretations - Table of Contents Standard Interpretations - Table of Contents
• Standard Number: 1910.133(b)(2)

December 9, 1976

Mr. Jim Pryde
Safety and Security Administrator
Wagner Castings Company
P. O. Box 1319
Decatur, Illinois 62525

In re: Your letter dated November 23, 1976 Clip-on Side Shields

Dear Mr. Pryde:

If the hazards to which your employees are exposed requires side protection for their eyes, it is recommended that you provide safety glasses with permanently attached side shields. You may use clip-on side shields if they are not easily detached and otherwise meet the requirements of ANSI Z87.1 - 1968. One of these requirements is that the side shields be tapered with an anatomical periphery extending at least halfway around the circumference of the lens frames. This requirement cannot be met by some temple-mounted side shields.

Please contact us if we can be of further service.

Very truly yours,



EDWARD J. LARGENT
Assistant Regional Administrator
for Technical Support

cc: Barry J. White,
Regional Administrator - OSHA
Washington, D.C.

Standard Interpretations - Table of Contents Standard Interpretations - Table of Contents