|
|
| Record Type: | Instruction |
| Directive Number: | STD 01-05-016 |
| Old Directive Number: | STD 1-5.16 |
| Title: | Venting LP-Gas to the Atmosphere |
| Information Date: | 10/16/1980 |
| Standard Number: | 1910.110(b)(14)(iv) |
|
OSHA Instruction STD 1-5.16 OCT 16, 1980 Office of Compliance Programming SUBJECT: Venting LP-Gas to the Atmosphere A. Purpose. This instruction provides guidance to insure appropriate enforcement of 29 CFR 1910.110(b)(14)(iv) in transferring LP-Gas from storage containers to fuel containers of industrial trucks (including lift trucks). B. Scope. This instruction applies OSHA-wide. C. Action. OSHA Regional Administrators/Area Directors shall assure that the enforcement of 29 CFR 1910.110(b) (14)(iv) is consistent with the guidelines in E. of this instruction. D. Federal Program Change. This instruction describes a Federal program change which affects State programs. Each Regional Administrator shall:
OSHA Instruction STD 1-5.16 OCT 16, 1980 Office of Compliance Programming E. Guidelines. Fixed liquid level gages shall not be vented to the atmosphere to assist in transferring LP-Gas from the storage container to the fuel container of industrial trucks (including lift trucks) except under the following conditions:
F. Background. 29 CFR 1910.110(b)(14)(iv) requires that the venting of fuel to the atmosphere not be permitted except under certain conditions. These conditions are not clearly stated in the 29 CFR 1910 standards, but the intent of the standards supports the position of this instruction and provides equivalent protection for exposed employees. Bruce Hillenbrand Acting Director, Federal Compliance and State Programs DISTRIBUTION: National, Regional and Area Offices Compliance Officers State Designees NIOSH Regional Program Directors |
|
|

Newsletter
RSS Feeds
Print This Page
Text Size
