A
Accident investigation
Number: VT01293
Material: video, 22 minutes
Industry: all industries
Describes how to effectively conduct an accident investigation including the purpose of accident
investigation, interviewing the witnesses, gathering and analyzing the information, and
implementing improvements.
Summit Training Source, 1987
Accident investigation: Just the facts
Number: VT01416
Material: video, 18 minutes
Industry: construction
Covers how to effectively conduct an accident investigation including the purpose of accident
investigation, gathering the facts, interviewing the witnesses, analyzing the information, and
implementing improvements.
Assoc General Contractors of America, 1991
Accident prevention: Staying a step ahead
Number: VT01263
Material: video, 18 minutes
Industry: general industry
Covers the basics for setting up a company safety program including establishing procedures for
reporting hazards, hazard assessment and correction, and employee training. NOTE: Washington State
may have stricter standards than OSHA.
WA State Dept of Labor & Industries, 1992
Accidents: It can't happen to me
Number: VT01575
Material: video, 10 minutes
Industry: general industry
Covers, through interviews with workers, the basic causes and prevention of accidents including
safety attitudes and practices.
Digital 2000, 1997
Advertencia a los peligros de plomo (lead)
Number: VT01386Spanish
Material: video, 13 minutes
Industry: construction
Discusses lead hazards including health effects and personal protective
Chicago Construction Safety Council, 1996
Aerial lift safety
Number: VT01506
Material: video, 7 minutes
Industry: all industries
Demonstrates safe operating procedures, pre-operation inspection, work site evaluation and safe
work practices.
Summit Training Source, 1998
Agricultural vehicle safety orientation
Number: VT01532
Material: video, 12 minutes
Industry: agriculture
Covers basic safety measures including defensive driving techniques and pre-operation inspection.
Digital 2000, 1994
Agricultural vehicle safety orientation
Number: VT01534Spanish
Material: video, 12 minutes
Industry: agriculture
See previous description.
Digital 2000, 1994
Air purifying respirators
Number: VT00357
Material: video, 7 minutes
Industry: general industry
Demonstrates the care and storage of air purifying respirators, the situations where they are
worn, and proper fit testing.
Summit Training Source, 1990
Airborne hazards
Number: VT00358
Material: video, 6 minutes
Industry: general industry
Describes airborne contaminants, their effect on the respiratory system, and the importance of
selecting the right respirator for the job.
Summit Training Source, 1990
All about OSHA
Number: VT01679Spanish
Material: video, 8 minutes
Industry: all industries
Provides an introduction to OSHA for the Spanish-speaking workforce including Latino accident
statistics, OSHA inspections, reporting job hazards, and employer responsibilities. NOTE: Mention
is made of some Georgia
OSHA Atlanta West Area Office, 2000
Arc welding operations: Construction
Number: VT01576
Material: video, 11 minutes
Industry: construction
Reviews safety and health hazards including operating procedures, securing the work zone,
ventilation, grounding, personal protective equipment, and fire prevention.
Digital 2000, 1992
Asbestos awareness
Number: VT00359
Material: video, 6 minutes
Industry: general industry
Covers the identification and uses of asbestos, where it is found and its health hazards.
Summit Training Source, 1990
Asbestos awareness: Are you at risk?
Number: VT01565
Material: video, 19 minutes
Industry: all industries
Discusses the three forms of asbestos, how they are used, possible locations, recognizing damage
and deterioration, hazard communication, health effects, housekeeping requirements, and personal
protection.
Coastal Training, 1992
Asbestos exposure: Within safe limits
Number: VT01590
Material: video, 15 minutes
Industry: construction
Describes how asbestos is used in construction, its effect on the body, and how workers can
protect themselves from exposure.
Assoc General Contractors of America, 1998
Asbestos removal: Jobsite techniques
Number: VT01126
Material: video, 20 minutes
Industry: construction
Covers safe asbestos removal from job site preparation to clean up.
Sheet Metal & Air Conditioning Industry, 1988
Avoid hot mix hazards
Number: VT01566
Material: video, 12 minutes
Industry: construction
Covers basic hot mix road construction safety including hot mix plants, hot mix transfer, dump
trucks, heavy equipment, traffic control, and personal protective equipment.
Assoc General Contractors of America, 1993
Avoiding electrical hazards
Number: VT01430
Material: video, 19 minutes
Industry: general industry
Discusses working safely around electricity including personal protection, working on energized
circuits, lockout/tagout, and working near power lines.
Coastal Training, 1989
Avoiding electrical hazards
Number: VT01614Spanish
Material: video, 19 minutes
Industry: general industry
See above description
Coastal Training, 1994
Avoiding struck by/hit by: Construction
Number: VT01549
Material: video, 18 minutes
Industry: general industry
Covers safety precautions around heavy equipment and rotating/pivoting machinery, construction
vehicle movement signals and alarms, proper stacking of building materials, protection from
falling objects, and the use of personal protective equipment.
J.J. Keller & Associates, 1996
B
Back injury prevention: Construction
Number: VT01370
Material: video, 5 minutes
Industry: construction
Explains how the back functions, safe lifting techniques, and prevention of back injuries.
Digital 2000, 1993
Back safety
Number: VT00360
Material: video, 6 minutes
Industry: all industries
Covers how the back functions, proper lifting techniques, good posture, and prevention of
injuries.
Summit Training Source, 1990
Back safety: The ergonomic connection
Number: VT01683
Material: video, 14 minutes
Industry: all industries
Explains ways to prevent back disorders including how the back works, proper body mechanics,
common back injuries, risk factors, and preventive measures.
Summit Training Source, 1992
Back to basics: Construction back injury prevention
Number: VT01406
Material: video, 18 minutes
Industry: construction
Explains how the back functions and the causes and prevention of back injuries including proper
lifting techniques and good work posture.
Assoc General Contractors of America, 1992
Back your back: Back & Muscle injury prevention
Number: VT01276
Material: video, 19 minutes
Industry: general industry
Explains the causes and prevention of back injuries and lifting techniques.
WA State Dept of Labor &
Industries, 1992
Backhoe safety
Number: VT01503
Material: video, 18 minutes
Industry: construction
Emphasizes safe operating techniques including pre-operation inspection, safety procedures,
unloading from trailers, and digging near underground and overhead utilities.
Zomar Productions, 1992
Backhoe/loader operation
Number: VT01740
Material: video, 16 minutes
Industry: construction
Covers backhoe operation safety
including planning the job, trenching and backfilling, working a spoil pile, and lifting
techniques
Assoc General Contractors of America, 2001
Backhoe/loader operations and safety
Number: VT01371
Material: video, 5 minutes
Industry: construction
Covers general backhoe safety practices, operating rules, and maintenance procedures.
Digital 2000, 1993
Basic electrical safety
Number: VT01281
Material: video, 7 minutes
Industry: all industries
Discusses the properties of electricity, its hazards, and working safely with electric powered
tools and equipment.
Training Network-LIP, 1992
Basic electrical safety Construction
Number: VT01387
Material: video, 7 minutes
Industry: construction
Discusses the properties of electricity and the hazards involved in working with electric power
tools and equipment including grounding, extension cords, inspection and maintenance, and working
in wet weather.
CoreMedia Training, 1991
Basic electrical safety on the job site
Number: VT01313
Material: video, 11 minutes
Industry: construction
Reviews the principles and properties of electricity, its hazards, and the safe use of electrical
equipment and extension cords on the job site.
Digital 2000, 1992
Basic electrical safety on the job site
Number: VT01499Spanish
Material: video, 11 minutes
Industry: construction
See previous description.
Digital 2000, 1992
Basic ergonomics
Number: VT01637
Material: video, 5 minutes
Industry: all industries
This humorous video provides a definition, gives a short history, and covers its relevance in the workplace.
Safety Shorts, 1989
Basic look at scaffolds for compliance officers
Number: VT01259
Material: video, 21 minutes
Industry: construction
Discusses OSHA requirements for scaffolding and scaffold construction.
OSHA Office of Construction & Engineering, 1994
Bloodborne pathogens
Number: VT00412
Material: video, 20 minutes
Industry: all industries
Describes basic bloodborne disease transmission and precautions, decontamination, and minimizing
the risk of infection through proper housekeeping and personal protective
Coastal Training, 1992
Bloodborne pathogens
Number: VT01577
Material: video, 9 minutes
Industry: all industries
Covers information on HIV and Hepatitis B, transmission, work accident first aid procedures, and
exposure prevention.
Digital 2000, 1998
Bloodborne pathogens
Number: VT01733
Material: video, 6 minutes
Industry: all industries
Discusses HIV, Hepatitis B and C including the hazards, means of transmission, misconceptions
about
exposure, symptoms of infection, and proper protective measures.
Summit Training Source, 1990
Bloodborne pathogens case histories
Number: VT01592
Material: video, 21 minutes
Industry: general industry
Through the retelling of real-life stories,
discusses bloodborne disease transmission, safe work practices, PPE, housekeeping, and engineering
controls for first responders.
Coastal Training, 1995
Bloodborne pathogens standard: How it affects you, how it protects you
Number: VT01686
Material: video, 20 minutes
Industry: health care
Reviews standard precautions, HBV vaccinations, engineering controls, work practice controls, and
personal protective equipment.
Coastal Training, 1992
Bloodborne pathogens: Know the risk
Number: VT01633
Material: video, 19 minutes
Industry: all industries
Covers common sense guidelines for workers including information on bloodborne diseases,
transmission, exposure risk, preventing or minimizing exposure risk, housekeeping, and the proper
use, removal and disposal of PPE.
Coastal Training, 1997
Bloodborne pathogens: Long-term care
Number: VT01684
Material: video, 23 minutes
Industry: health services
Discusses safe work practices and precautions including workplace transmission, reducing the risk,
and personal protective equipment.
Coastal Training, 1992
Bloodborne pathogens: Protect your dental environment
Number: VT01685
Material: video, 19 minutes
Industry: health services
Covers safe work practices for the dental worker including workplace transmission, dealing with
sharp instruments, reducing the risk, and personal protective equipment.
Coastal Training 1992
Bloodborne pathogens: Protect yourself
Number: VT00454
Material: video, 15 minutes
Industry: general industry
Covers basic bloodborne disease transmission and precautions for workers including first-aid
safeguards, decontamination procedures, and proper housekeeping for first-on-the-scene co-workers.
Coastal Training, 1992
Bloodborne pathogens: Protect yourself
Number: VT001715 Spanish
Material: video, 15 minutes
Industry: general industry
See previous description.
Coastal Training, 2000
Bloodborne pathogens: What employees must know
Number: VT01698
Material: video, 15 minutes
Industry: general industry
Provides practical tips and safe work practices for employees including personal protective
equipment, safe work practices, engineering controls, reporting exposure and labeling.
J.J. Keller & Associates, 2001
Boomlifts in construction
Number: VT01528
Material: video, 10 minutes
Industry: construction
Covers startup inspections, lifting principles, hazards including overhead power lines, and safe
operating procedures.
Coastal Training, 1996
Breathing easy: What you should know about indoor air quality
Number: VT01364
Material: video, 13 minutes
Industry: general industry
Discusses the factors affecting indoor air quality including ventilation systems, temperature and
humidity, and sources of contaminants.
Public Building Services,1992
Bridge construction safety: Safe span
Number: VT01423
Material: video, 10 minutes
Industry: construction
Covers bridge construction hazards and safety measures including falls, cranes, and scaffolds.
Assoc General Contractors of America, 1993
Bucket truck safety: Training for operators
Number: VT01699
Material: video, 18 minutes
Industry: all industries
Covers safety and operation issues, explains what can go wrong, and how to prevent these
situations from happening.
J.J. Keller & Associates, 2000
C
Can you spot the hazard?
Number: VT01638
Material: video, 6 minutes
Industry: all industries
Covers conducting a workplace
inspection, identifying hazards including fire and electrical, and safety measures including
housekeeping and personal protective equipment.
Safety Shorts, 1999
Carpal tunnel
Number: VT00361
Material: video, 5 minutes
Industry: general industry
Describes carpal tunnel syndrome and ways to eliminate the stress caused by this repetitive motion
injury.
Summit Training Source, 1990
Carpenters: A study of hazards in the construction industry
Number: VT01153
Material: video, 12 minutes
Industry: carpentry and floor
Focuses on general safety and health hazards faced by carpenters on the construction-site
including scaffolding, ladders, personal protective equipment, and power tools.
Florida AFL-CIO United Labor Agency, 1986
Case of the vicious vapor
Number: VT01473
Material: video, 7 minutes
Industry: all industries
This humorous video deals with how to investigate a hazardous vapor incident including air
sampling, personal protective equipment, and proper
Kirkwood Community College, 1995
Caution: Foundry at work
Number: VT01628
Material: video, 10 minutes
Industry: general industry
Covers foundry operations, safe work practices, hazard control, and health and safety hazards
including metal fumes, noise, heat, and silica.
US National Institute for OSH, 1997
Caution: Foundry at work (CC)
Number: DVD07
Material: DVD, 10 minutes
Industry: general industry
See previous description.
US National Institute for OSH, 1998
Caution: Foundry at work (CC)
Number: DVD08Spanish
Material: DVD, 10 minutes
Industry: general industry
See previous description.
US National Institute for OSH, 1998
Chains, cranes, & slings
Number: VT01362
Material: video, 5 minutes
Industry: general industry
Covers equipment pre-use inspection, load handling and sling angles.
Training Network-LIP, 1992
Chains, cranes, slings and hoists
Number: VT01363
Material: video, 12 minutes
Industry: general industry
Covers pre-use inspections, maintenance and proper use of lifting devices including equipment
protection, safe load capacities and sling angles.
Training Network-LIP, 1994
Chainsaw leg protection
Number: VT01758
Material: video, 4 minutes
Industry: general industry
This brief but graphic video demonstrates the devastating effects of the chainsaw on various
materials including jeans, old chaps, and state of the art chaps.
WA State Dept of Labor & Industries, 2002
Chemical burns
Number: VT00362
Material: video, 5 minutes
Industry: general industry
Discusses safe work practices, the use of chemical-resistant personal protection, and first aid
measures.
Summit Training Source, 1990
Chemical handling: Corrosives
Number: VT01486
Material: video, 12 minutes
Industry: all industries
Reviews basic information about corrosives including characteristics, hazards, PPE, exposure
symptoms,
labeling, handling and storage.
Coastal Training, 1992
Chemical handling: Flammables
Number: VT01432
Material: video, 14 minutes
Industry: all industries
Covers basic information about handling flammables and combustibles in the workplace including
their characteristics and hazards, ignition, MSDSs, labeling, emergency response, handling and
storage.
Coastal Training, 1992
Chemical handling: General principles
Number: VT01433
Material: video, 16 minutes
Industry: all industries
Covers safe work practices for handling flammables, corrosives, and solvents including their
characteristics and hazards, handling and storage.
Coastal Training, 1990
Chemical handling: Solvents
Number: VT01619
Material: video, 12 minutes
Industry: all industries
Provides general information on solvents including the effect of solvents on the body, exposure
symptoms, handling and storage, safety rules, labeling, fire hazards, and emergency response.
Coastal Training, 1992
Chemicals in the workplace
Number: VT01516
Material: video, 15 minutes
Industry: general industry
Details material safety data sheets and labels, recognition of chemical hazards, safe handling
techniques and storage, and personal protective equipment.
J.J. Keller & Associates, 1988
Competent person and soils testing
Number: VT01504
Material: video, 27 minutes
Industry: construction
Defines the role and responsibilities of the “competent person,” explains the soil classification
system, shows five easy field tests for determining soil types including by means of a pocket
penetrometer, and preparing for an OSHA inspection.
Zomar Productions, 1992
Complete confined spaces handbook by John F. Rekus
Number: T55.R45
Material: book, 381 pages
Industry: all industries
Covers recommended procedures and guidance for safe entry into confined spaces.
Lewis Publishers, 1994
Compressed gas cylinders: Storage
Number: VT01471
Material: video, 10 minutes
Industry: construction
Discusses safety rules and procedures for the safe storage of compressed gas cylinders.
Digital 2000, 1992
Compressed gas cylinders: Using and handling
Number: VT01472
Material: video, 8 minutes
Industry: construction
Explains the hazards and procedures for the safe use, storage, and handling of compressed gas
cylinders.
Digital 2000, 1992
Compressed gases: Safe handling
Number: VT01453
Material: video, 18 minutes
Industry: all industries
Provides information on both flammable and non-flammable compressed gases including
classifications, labeling, handling cylinders, valves and leaks.
Coastal Training, 1995
Concrete construction safety: Laying the groundwork
Number: VT01751
Material: video, 13 minutes
Industry: construction
Covers the hazards associated with concrete construction.
IL Onsite S&H Consultation Program, 2002
Conducting a safety meeting in the field
Number: VT01250
Material: video, 14 minutes
Industry: logging
Discusses how to conduct a safety meeting at the work site.
University of Idaho, 1992
Confined space atmospheric testing
Number: VT01663
Material: video, 17 minutes
Industry: general industry
Reviews the how and when to test, atmospheric hazards, procedures for proper pre-testing, and how
to respond when air is determined to be unsafe.
Coastal Training, 1992
Confined space case histories
Number: VT01434
Material: video, 14 minutes
Industry: all industries
Shows re-enactments of real-life confined space accidents and reviews what went wrong including
atmospheric testing, ventilation and permits.
Coastal Training, 1995
Confined space case histories
Number: VT01716Spanish
Material: video, 14 minutes
Industry: all industries
See previous description.
Coastal Training, 1995
Confined space emergency rescue
Number: VT01650
Material: video, 14 minutes
Industry: all industries
Covers the hazards of confined spaces, the proper use of safety and rescue equipment, and rescue
pre-planning and training.
Summit Training Source, 1994
Confined space entry
Number: VT01687
Material: video, 25 minutes
Industry: all industries
Covers characteristics and types of confined space, hazards, control measures, entry permits,
personal protective equipment, and rescue techniques.
Primedia Workplace Learning, 1993
Confined space entry: Clearing the air
Number: VT01567
Material: video, 16 minutes
Industry: construction
Discusses the dangers of confined space entry, entry permits, air quality testing, ventilation,
rescue procedures and personal protective equipment.
Assoc General Contractors of America, 1991
Confined space entry: Construction
Number: VT01369
Material: video, 5 minutes
Industry: construction
Explains hazards, procedures, and safety measures for entry into confined spaces including
atmosphere testing.
Digital 2000, 1993
Confined space entry: Permit required!
Number: VT01435
Material: video, 12 minutes
Industry: all industries
Covers the dangers of working in
confined spaces and safety precautions including entry permit requirements, safe atmospheric
testing, ventilation, and personal protective equipment.
Coastal Training, 1990
Confined space hazards
Number: VT01302
Material: video, 5 minutes
Industry: all industries
Explains types of confined spaces, atmospheric and physical hazards, and safe work practices.
Summit Training Source, 1990
Confined space hotwork: Checklist to safety
Number: VT01454
Material: video, 20 minutes
Industry: all industries
Describes the hazards and the safety precautions required for confined space hotwork including
hotwork permits, atmospheric testing, safety equipment, fire watch, and emergency rescue.
Coastal Training, 1992
Confined space rescue
Number: VT01303
Material: video, 6 minutes
Industry: all industries
Demonstrates simulated rescue situations, proper use of rescue and retrieval equipment, and rescue
procedures.
Summit Training Source, 1990
Confined space rescue
Number: VT01599
Material: video, 31 minutes
Industry: general industry
Reviews proper confined space entry, technical rescue procedures, different types of rescue
systems and equipment, and developing the rescue team.
Coastal Training, 1991
Confined space ventilation
Number: VT01651
Material: video, 18 minutes
Industry: all industries
Reviews the safety precautions required for confined space ventilation including the when and how
to ventilate, atmospheric hazards, types of mechanical ventilation, and techniques.
Coastal Training, 1992
Confined spaces, deadly places
Number: VT01626
Material: video, 21 minutes
Industry: all industries
Based on real-life incidents that show the hazards that can befall untrained workers and permit
violators including confined space hazards, oxygen deficiency, toxic atmospheres, engulfment,
flammable or explosive atmospheres, and mechanical hazards.
Safe Expectations, 1992
Confined spaces: A training program for employees
Number: VT01517
Material: video, 25 minutes
Industry: general industry
Covers identification of confined space hazards, discusses entry permits, reviews training needs,
and outlines standard requirements such as atmospheric testing and personal protective equipment.
J.J. Keller & Associates, 1993
Construction accidents: It can't happen to me
Number: VT01616
Material: video, 8 minutes
Industry: construction
Covers, through interviews with workers, the basic causes and prevention of accidents including
safety attitudes and practices.
Digital 2000, 1997
Construction back safety
Number: VT01600
Material: video, 10 minutes
Industry: construction
Covers safety techniques including correct posture, proper lifting procedures, and preventing back
injuries.
Coastal Training, 1992
Construction confined space entry
Number: VT01455
Material: video, 12 minutes
Industry: construction
Covers skills for working safely in confined spaces including how to identify confined spaces,
their hazards including oxygen deficiency and toxic gases, safety procedures and entry permits.
Coastal Training, 1992
Construction electrical safety
Number: VT01456
Material: video, 10 minutes
Industry: construction
Covers the properties of electricity, electrical hazards, accident response, and proper work
practices including the safe use of power tools and equipment.
Coastal Training, 1993
Construction emergency medical response
Number: VT01674
Material: video, 15 minutes
Industry: construction
Covers what workers should do in an emergency situation and assists contractors in the development
of an emergency medical plan.
Assoc General Contractors of America, 1999
Construction equipment safety: Multiple choice
Number: VT00354
Material: video, 24 minutes
Industry: construction
Covers heavy equipment operation safety through accident re-enactments that are freeze-framed at
the actual moment of judgment. Viewers are asked to spot the hazards before the action is resumed.
Allied Digital Technologies, 1984
Construction equipment safety: Shake hands with danger
Number: VT00259
Material: video, 23 minutes
Industry: construction
This award winning video shows re-enactments of hazardous situations faced by workers who operate
and maintain heavy construction equipment, to stress the need to follow safe work practices.
Allied Digital Technologies1984
Construction fall protection: Get arrested!
Number: VT01557
Material: video, 11 minutes
Industry: construction
This humorous video covers the effective use of body harness and lanyard in personal fall arrest
systems, as well as positioning systems, proper anchorage techniques, floor hole covers, and
guardrail construction.
Coastal Training, 1998
Construction fall protection: Get arrested!
Number: VT01615Spanish
Material: video, 12 minutes
Industry: construction
See previous description.
Coastal Training, 1998
Construction fall protection: Hook Up
Number: VT01487
Material: video, 10 minutes
Industry: construction
Discusses fall hazards, the three types of fall arrest systems, fall arrest distances, choosing
anchorage and tie-off points, equipment inspection, proper use of equipment, and the rescue of
fallen workers.
Coastal Training, 1995
Construction fire prevention: Avoid the heat
Number: VT01405
Material: video, 15 minutes
Industry: construction
Discusses fire hazards and prevention on the job site including proper storage of combustibles and
flammables, control of welding sparks and fire watch, safety cans, housekeeping, and the types and
use of fire extinguishers.
Assoc General Contractors of America 1992
Construction forklift safety
Number: VT01314
Material: video, 14 minutes
Industry: construction
Covers pre-operation inspection, maintenance, safe operating procedures, and forklift engineering
principles such as leverage and stability.
Digital 2000, 1991
Construction forklifts
Number: VT01457
Material: video, 9 minutes
Industry: construction
Covers safe operating procedures for both fixed mast lift and extended reach forklifts including
start-up inspections, lifting principles, rated load capacity, center of gravity, and moving a load.
Coastal Training, 1996
Construction forklifts: Extending your reach
Number: VT01593
Material: video, 14 minutes
Industry: construction
Covers extended reach forklift safety including lifting principles, start-up inspections, load
stability, leverage, rated load capacity, moving the load, electrical hazards, and safety
procedures.
Coastal Training, 1999
Construction health risks
Number: VT01232
Material: video, 15 minutes
Industry: construction
Discusses health hazards found on the construction-site including the effects of toxic chemicals,
asbestos, welding fumes, and silica.
Florida AFL-CIO United Labor Agency, 1989
Construction jobsite safety
Number: VT01550
Material: video, 20 minutes
Industry: construction
Covers how to recognize and avoid jobsite hazards such as power tools, heavy equipment, scaffolds,
electrical, falls and safety measures such as personal protective equipment and emergency action
plans.
J.J. Keller & Associates, 1996
Construction lockout/tagout
Number: VT01458
Material: video, 10 minutes
Industry: construction
Discusses the prevention of unexpected start-ups of equipment during servicing and maintenance
including how lockout/tagout systems operate and a six-step safety procedure.
Coastal Training, 1992
Construction lockout/tagout: Take control
Number: VT01427
Material: video, 20 minutes
Industry: construction
Reviews the types of hazardous energy found on the jobsite, identifying potential hazards, proper
lockout/tagout procedures, and equipment re-energizing procedures.
Assoc General Contractors of America, 1993
Construction repetitive stress injuries
Number: VT01639
Material: video, 5 minutes
Industry: construction
Covers one of the fastest growing types of workplace injuries, its symptoms, proper work
techniques, and the effects of overexertion, incorrect posture, and excessive force.
Safety Shorts, 1998
Construction respiratory protection: Breathing easier
Number: VT01408
Material: video, 18 minutes
Industry: construction
Provides basic information about jobsite respiratory hazards, types of respirators, selection, fit
testing procedures, use, inspection and maintenance.
Assoc General Contractors of America, 1993
Construction safety Choice or chance?
Number: VT01280
Material: video, 15 minutes
Industry: construction
Highlights the four leading causes of fatalities on construction job sites and stresses that
safety is also the worker’s responsibility.
OSHA Office of Information & Consumer Affairs, 1996
Construction safety essentials
Number: VT01548
Material: video, 23 minutes
Industry: construction
Discusses jobsite hazards such as scaffolding, ladders, confined spaces, excavations, and safety
measures such as personal protective equipment and fall arrest systems.
Vocam, 1997
Construction safety: New hire safety orientation
Number: VT01388
Material: video, 10 minutes
Industry: construction
Discusses basic jobsite safety procedures including fire extinguisher use, hearing protection,
hazardous substances, fall protection, housekeeping, electrical safety, ladders, and lifting.
CoreMedia Training Solutions, 1991
Construction safety planning by David V. MacCollum
Number: TH443.M
Material: book, 285 pages
Industry: construction
Provides a broad overview and summary of safety considerations when planning for both large and
small construction
Van Nostrand Reinhold, 1995
Construction safety practices and principles by Robert Peyton and Toni C. Rubio
Number: TH443.P4
Material: book, 266 pages
Industry: construction
Discusses how to integrate safety into jobsite operations including written safety and health
programs, hazard communication, and safety training.
Van Nostrand Reinhold, 1991
Construction scaffold safety
Number: VT01529
Material: video, 10 minutes
Industry: construction
Explains construction, inspection, and safety procedures including fall arrest systems for
stationary, mobile, and suspension scaffolds.
Coastal Training, 1995
Construction shoring safety
Number: VT01505
Material: video, 24 minutes
Industry: construction
Covers installation of timber, screwjack and hydraulic shoring systems, determining soil types,
sheeting designs, and safety hazards unique to trenching operations.
Coastal Training, 1990
Construction signs and barricades
Number: VT01495
Material: video, 10 minutes
Industry: construction
Gives an overview of signs, signals and barricades used on construction sites including road
construction.
Digital 2000, 1995
Construction slips and falls
Number: VT01645
Material: video, 6 minutes
Industry: construction
This humorous video discusses the causes of slips and falls, proper footwear, and prevention
including awareness of hazards and good housekeeping.
Safety Shorts, 1996
Construction stairways and ladders
Number: VT01436
Material: video, 12 minutes
Industry: construction
Discusses ladder and stairway hazards and safety precautions including proper setup and use, slope
ratio, inspection and maintenance, and construction.
Coastal Training, 1992
Construction stationary scaffolds
Number: VT01437
Material: video, 11 minutes
Industry: construction
Covers safety practices for working on and around stationary scaffolds including hazards,
construction, inspection, fall prevention, and use.
Coastal Training, 1997
Construction temporary electricity: Take charge
Number: VT01426
Material: video, 18 minutes
Industry: construction
Covers electrical hazards found on the jobsite, how electricity works, safety measures, GFCIs,
extension cords, power tools, and temporary power installations.
Assoc General Contractors of America, 1991
Construction trenching and shoring
Number: VT01459
Material: video, 10 minutes
Industry: construction
Covers safety guidelines including site evaluation, protective systems, and emergency response.
Coastal Training, 1992
Construction warning labels and signs
Number: VT01469
Material: video, 16 minutes
Industry: construction
Discusses various labeling systems, the reason for warning labels and signs around the jobsite
including chemical hazards and safety precautions.
Coastal Training, 1996
Construction warning signs
Number: VT01605
Material: video, 4 minutes
Industry: construction
Deals with reasons to take warning signs, found on and around construction sites, seriously
because they warn of potential safety hazards.
Assoc General Contractors of America, 1992
Construction welding safety
Number: VT01438
Material: video, 12 minutes
Industry: construction
Discusses the essentials of welding safety focusing on oxyfuel gas welding and cutting including
operation procedures and safety equipment.
Coastal Training, 1993
Construction worker safety orientation: Getting the job done safely
Number: VT01569
Material: video, 12 minutes
Industry: construction
Outlines basic jobsite safety measures including personal protective equipment, manual material
handling, fall protection, electrical hazards, excavations, and housekeeping.
Assoc General Contractors of America, 1995
Construction worker safety orientation: Getting the job done safely
Number: VT01607Spanish
Material: video, 12 minutes
Industry: construction
See previous description.
Assoc General Contractors of America, 1995
Contractor beware: Guide to power line safety
Number: VT01708
Material: video, 16 minutes
Industry: construction
Covers safety precautions when working near overhead or underground power lines including how
electricity can kill, operating cranes and heavy equipment such as backhoes, and calling electric
utilities before you dig.
Connecticut Light & Power1997
Contractor's guide to process safety management: a part of the process
Number: VT01585
Material: video, 14 minutes
Industry: construction
Covers work safety in industrial process facilities including hazard control, worker training, and
OSHA’s Process Safety Management Standard.
Assoc General Contractors of America, 1994
Conveyors
Number: VT01640
Material: video, 6 minutes
Industry: general industry
This humorous video gives an overview of conveyor hazards including nip points and falling
materials, and preventive measures including guards, warning signs, and safe work practices.
Safety Shorts, 1996
Corrosives
Number: VT00363
Material: video, 5 minutes
Industry: general industry
Covers the hazards associated with corrosives, including battery acid and phosphates, proper
handling and storage in the work environment.
Summit Training Source, 1990
Crane and sling safety: Inspection and use
Number: VT01390
Material: video, 19 minutes
Industry: general industry
Covers basic safety procedures when working with overhead and boom cranes including daily
pre-operation inspection, maintenance, lifting procedures, and proper use techniques.
CoreMedia Training, 1992
Crane operation safety
Number: VT01535
Material: video, 12 minutes
Industry: construction
Focuses on the basic procedures for the safe operation of overhead and boom cranes including
pre-operation inspection, pre-lift check, and sling maintenance and inspection
Industrial Training Systems1995
Crane rigging safety: Controlling the load
Number: VT01409
Material: video, 17 minutes
Industry: construction
Discusses the basics of crane rigging safety including pre-use inspection of hooks and slings,
planning the lift including determining the weight, stability of the load, and the center of
gravity of the load, and choice of sling.
Assoc General Contractors of America, 1992
Crane safety awareness for site superintendents
Number: VT01186
Material: video, 8 minutes
Industry: construction
Highlights common hazards associated with construction mobile crane operations and discusses
management responsibilities for safe operation on the jobsite.
OSHA Office of Construction & Engineering, 1992
Crane safety: Construction
Number: VT01315
Material: video, 13 minutes
Industry: construction
Covers mobile crane pre-operation inspection, refueling, potential hazards such as power lines,
load capacities, lifting procedures, and safety
Digital 2000, 1992
Crane safety: Play it safe
Number: VT01420
Material: video, 15 minutes
Industry: construction
Covers crane safety practices for crane operators and riggers including daily pre-work inspection
and maintenance, proper loading and moving a load, and surveying the jobsite for hazards such as
overhead power lines.
Assoc General Contractors of America, 1992
Cut-off saw safety
Number: VT01671
Material: video, 9 minutes
Industry: construction
Reviews hazards, proper PPE, and safe operating practices including pre-use inspection, blade
installation, refueling, startup, and guard positioning.
Assoc General Contractors of America, 1994
D
Dark ages of safety
Number: VT01533
Material: video, 12 minutes
Industry: all industries
This humorous video uses black and white footage from the 20's, 30's, and 40's to emphasize the
importance of following safety procedures.
Digital 2000, 1995
Deadly dust II
Number: VT01540
Material: video, 30 minutes
Industry: grain elevators
Shows dramatic scenes of grain elevator explosions, the devastation caused by the blast,
demonstrations on how and why these explosions occur, and emergency planning.
Kansas State University, 1990
Deadly dust III
Number: VT01541
Material: video, 22 minutes
Industry: grain elevators
Features two employees who survived major dust explosions, dramatic scenes of actual explosions,
stop motion demonstrations of how primary and secondary explosions occur, and prevention measures.
Kansas State University, 1995
Demolition safety: What goes up must come down
Number: VT01573
Material: video, 12 minutes
Industry: construction
Describes the demolition process and safety measures including on-site preparations, pre-stressed
concrete hazards, signs and barricades, cranes, and debris removal.
Assoc General Contractors of America, 1993
Don't blow it: Asbestos safety
Number: VT01268
Material: video, 15 minutes
Industry: automotive repair
Discusses asbestos, its health effects, and removal methods used to control exposure during brake
replacement.
US Environ Protection, 1986
Driver attitude
Number: VT00364
Material: video, 5 minutes
Industry: all industries
Covers safe driving procedures, seat belt use, and the effects of drugs and alcohol on driving.
Summit Training Source, 1990
Driver's safety: Thinking ahead
Number: VT01741
Material: video, 14 minutes
Industry: construction
Provides instruction on safe driving practices for construction workers required to operate motor
vehicles while on the job.
Assoc General Contractors of America, 1996
Driving safety: Highway-rail crossing safety
Number: VT01713
Material: video, 18 minutes
Industry: commercial vehicles
Shows a reenactment of a train/school bus crash to illustrate the dangers of not following safety
procedures when crossing railroad track, also includes a ten-step procedure for safe driver
actions.
Idaho Dept of Law Enforcement, 1991
Driving safety: The safety zone
Number: VT01714
Material: video, 16 minutes
Industry: all industries
Addresses what safety precautions car drivers should take when driving in close proximity to
trucks including the difference in weight ratios, blind spots, turning space, safe driving
distances, and stopping distance.
Idaho Dept of Law Enforcement, 1995
Dust control: It's everybody's business
Number: VT01382
Material: video, 20 minutes
Industry: all industries
Discusses how to reduce worker exposure to silica dust including dust collection equipment.
US Mine Safety and Health Administration, 1996
E
Egress/exit safety
Number: VT01641
Material: video, 5 minutes
Industry: general industry
Discusses exit doors, safe exits, clear paths, blocked exits, and employee awareness of exit
locations.
Safety Shorts, 1992
Electrical case histories: Fatal shock
Number: VT01439
Material: video, 22 minutes
Industry: general industry
Covers, through re-enactments of real-life electrical accidents, the principles of electrical
safety including the dangers of electrical shock, personal verification of lockout/tagout,
response to electrical emergencies, and PPE.
Coastal Training, 1994
Electrical power generation: High voltage
Number: VT01488
Material: video, 27 minutes
Industry: general industry
Presents safety information for electric utilities operations including working on or near exposed
energized parts and overhead power lines.
Coastal Training, 1994
Electrical principles
Number: VT01558
Material: video, 14 minutes
Industry: all industries
Demonstrates basic electrical principles including how electricity works, electrical circuits,
grounding, and circuit protection devices such as GFCIs.
Coastal Training, 1988
Electrical safety and asbestos abatement
Number: VT01094
Material: video, 12 minutes
Industry: construction
Covers electrical fundamentals and hazards. NOTE: OSHA does not require explosion-proof lighting
or equipment unless another hazard is present which would require its use.
Intl Assoc of Heat and Frost Insulators, 1987
Electrical safety in construction
Number: VT01380
Material: video, 19 minutes
Industry: construction
Covers both temporary and permanent jobsite installations of electricity including GFCIs,
temporary hook-ups, power tools and cord sets.
J.J. Keller & Associates, 1996
Electrical safety overview
Number: VT01282
Material: video, 10 minutes
Industry: general industry
Discusses the properties of electricity and its hazards, the inspection and care of electrical
equipment and power tools, and safe work practices including grounding, GFCIs, and lockout/tagout.
Digital 2000, 1993
Electrical safety: Basic principles
Number: VT01664
Material: video, 16 minutes
Industry: general industry
Covers the basic principles of electricity, reviews safe work conditions and procedures, emergency
response procedures, electrical circuits, insulators and conductors, grounding, and circuit
protection devices such as GFCIs.
Coastal Training, 2000
Electrical safety: Construction
Number: VT01372
Material: video, 5 minutes
Industry: construction
Covers basic safety rules when working with electrical tools and equipment including plugs, cords,
and GFCIs.
Digital 2000, 1993
Electrical safety: Ground Fault Circuit Interrupters
Number: VT01580
Material: video, 11 minutes
Industry: construction
Covers what GFCI’s are all about, how they work, and general safety procedures for protection
against electrical shock.
Digital 2000, 1992
Electrical safety: Ground Fault Circuit Interrupters
Number: VT01726Spanish
Material: video, 11 minutes
Industry: construction
See previous description
Digital 2000, 1992
Electrical safety: Real, real-life
Number: VT01601
Material: video, 13 minutes
Industry: general industry
Explains, through re-enactments of real-life situations, hazards and safety practices when working
with or around electricity including PPE, proper grounding, and the use of GFCIs.
Coastal Training, 1998
Electrical safety: Real, real-life
Number: VT01717Spanish
Material: video, 13 minutes
Industry: general industry
See previous description.
Coastal Training, 1998
Electrical safety: Safe work practices
Number: VT01304
Material: video, 5 minutes
Industry: general industry
Describes electrical hazards, maintaining proper work distances from electrical sources, proper
tools and equipment, and personal protective equipment.
Summit Training Source, 1990
Electrical safety: The hazards of electricity
Number: VT01400
Material: video, 6 minutes
Industry: general industry
Covers the basic principles of electricity, the causes of electrocution and electrical shock and
electricity as the source of fire.
Summit Training Source, 1990
Elevated work safety
Number: VT01536
Material: video, 12 minutes
Industry: all industries
This humorous video covers general safety procedures for working on tower and suspended scaffolds,
aerial lifts, and roofs including proper setup, inspection, and fall arrest systems.
Industrial Training Systems, 1996
Elevated work surfaces: Getting it right at height
Number: VT01591
Material: video, 21 minutes
Industry: construction
Discusses working on scaffolds, elevated and suspended work platforms, and roofs including the
importance of planning and preparing the work, hazard recognition, safety procedures, and fall
Vocam, 1996
Emergency action plans: I plan to live
Number: VT01642
Material: video, 5 minutes
Industry: general industry
This humorous video covers warning signals, responsibility lists and assignments, exit routes, and
evacuation procedures.
Safety Shorts, 1992
Emergency action plans: Spiral to disaster
Number: VT01636
Material: video, 24 minutes
Industry: all industries
Using the Piper Alpha oil rig explosion as a backdrop, covers what makes a good Emergency Action
Plan including awareness of work-area hazards, risk analysis, training, safe work practices,
emergency procedures, and evacuation drills.
Coastal Training, 2000
Emergency evacuation training
Number: VT01522
Material: video, 18 minutes
Industry: general industry
gives step-by-step instructions on procedures to follow in an emergency including the important
role of pre-planning exit routes, egress, assembly areas, lines of authority, and all-clear signals.
Safe Expectations, 1990
Employee's guide to working with hazardous materials
Number: VT01365Spanish
Material: video, 16 minutes
Industry: all industries
See previous description.
S&H Council of Greater Omaha, 1996
Ergonomic programs that work
Number: VT01498
Material: video, 21 minutes
Industry: general industry
Discusses various aspects of an ergonomics program by visiting four companies and reviewing their
programs.
OSHA Office of Information & Consumer Affairs, 1998
Ergonomics awareness education
Number: VT01759
Material: video, 26 minutes
Industry: general industry
Describes musculoskeletal disorders, work related causes, recognizing hazards, identifying common
measures to reduce these hazards, risk factors, and the importance of early reporting
WA State Dept of Labor & Industries, 2002
Ergonomics in the workplace
Number: VT01393
Material: video, 18 minutes
Industry: general industry
Addresses production line tasks, cumulative trauma disorders, identification of workplace
activities that can cause CTD such as manual materials handling, and prevention measures.
Primedia Workplace Learning, 1995
Ergonomics: Solving the puzzle
Number: VT01623
Material: video, 18 minutes
Industry: general industry
Covers how to create an ergonomic work environment, how to reduce repetitive motion injuries, and
how to create a successful ergonomics program.
Coastal Training, 2000
Ergonomics: Your body at work
Number: VT01624
Material: video, 20 minutes
Industry: general industry
This award winning video reviews ergonomic mechanics, cumulative trauma disorders and contributing
factors, worksite analysis, and low-cost ergonomic worksite improvements.
Coastal Training, 1991
Excavation and trenching safety: On solid ground
Number: VT01418
Material: video, 18 minutes
Industry: construction
Covers identifying jobsite hazards and conditions, access and egress to trench, hazardous
atmospheres, emergency rescue, methods of sloping, shoring and shielding, and soil classification.
Assoc General Contractors of America, 1990
Excavation safety for workers: In the trenches
Number: VT01415
Material: video, 14 minutes
Industry: construction
Discusses trench hazards, how hazards can be reduced through sloping and shielding, and how to
safety work in and around them.
Assoc General Contractors of America, 1996
Excavations, trenches and shoring
Number: VT01294
Material: video, 14 minutes
Industry: construction
Provides an overview of protective systems, regulatory requirements and safe work practices.
Summit Training Source, 1996
Excavations: 29 CFR 1926, Subpart P
Number: VT01242
Material: video, 23 minutes
Industry: construction
Discusses the hazards associated with excavation operations and safe work practices and control
measures to prevent accidents.
OSHA Office of Training and Education, 1992
Exhaust air ventilation systems: operation and maintenance
Number: VT01095
Material: video, 18 minutes
Industry: construction
Describes how to set up and operate negative air filtration systems used in asbestos removal.
Intl Assoc of Heat and Frost Insulators, 1989
Eye and face protection: Safety gear
Number: VT01518
Material: video, 11 minutes
Industry: all industries
Describes different types of safety glasses, goggles, face shields, and helmets used to protect
the eyes and face from debris, chemicals, and dangerous light.
Aims Multimedia, 1989
Eye and face protection: Safety gear
Number: VT01727Spanish
Material: video, 11 minutes
Industry: all industries
See previous description.
Aims Multimedia, 1989
Eye safety
Number: VT00144
Material: video, 20 minutes
Industry: general industry
Covers the importance of eye protection, common eye injuries, and the selection and use of eye
protection.
Primedia Workplace Learning, 1985
Eye safety
Number: VT00365
Material: video, 5 minutes
Industry: general industry
Discusses three kinds of eye hazards, the specific type of eye protection for each hazard, and
proper first aid procedures are demonstrated.
Summit Training Source, 1990
Eye safety: Your eyes are different
Number: VT01653
Material: video, 14 minutes
Industry: general industry
Stresses, through its depiction of near misses and computer graphics, the need to consistently
wear eye protection, common eye injuries, and how to choose the correct type of eyewear for the
job.
CoreMedia Training 1994
Eyewashes and safety showers
Number: VT01702
Material: video, 12 minutes
Industry: all industries
Reviews the correct operation and use of eyewashes and safety showers, equipment testing, accident
prevention, reading MSDS, and proper procedures in chemical contact.
Training Network-LIP, 1994
F
Fall free: Employer training
Number: VT01289
Material: video, 25 minutes
Industry: construction
Covers the requirements of 1926 Subpart M for supervisory and management personnel including fall
hazards and their controls, protective systems, management responsibilities, and employee training
requirements.
Chicago Construction Safety Council, 1995
Fall free: Toolbox talk
Number: VT01288
Material: video, 9 minutes
Industry: construction
Focuses on the proper use of fall arrest equipment including body harnesses, lanyards, and
lifelines.
Chicago Construction Safety Council, 1995
Fall prevention: Elevated work surfaces
Number: VT01394
Material: video, 21 minutes
Industry: all industries
Covers safety procedures for working on and inspection of elevated work surfaces including aerial
lifts and scaffolds.
Primedia Workplace Learning, 1993
Fall protection for construction: Heightened awareness
Number: VT01413
Material: video, 20 minutes
Industry: construction
Covers types of fall protection systems and where they should be used including personal fall
arrest systems, guardrails, safety nets, floor covers, warning lines, and controlled access zones.
Assoc General Contractors of America, 1995
Fall protection for construction: Heightened awareness
Number: VT01515Spanish
Material: video, 20 minutes
Industry: construction
See previous description.
Assoc General Contractors of America, 1995
Fall protection for ironworkers
Number: VT01749
Material: video, 17 minutes
Industry: construction
Covers fall restraint systems, fall arrest systems, positioning devices, equipment inspection, and
controlled decking zones.
Coastal Training, 2001
Fall protection: Construction
Number: VT01556
Material: video, 24 minutes
Industry: construction
Covers fall protection systems including guardrails, nets, personal fall arrest, positioning
devices, warning lines, floor and hole covers, and controlled access zones.
J.J. Keller & Associates, 1995
Fall protection: Taking control
Number: VT01295
Material: video, 11 minutes
Industry: all industries
Discusses how to recognize potential fall hazards, developing a pro-active safety attitude, and
the proper use and care of fall protection equipment including anchor points, rope grabs, full
body harnesses, lanyards, and lifelines.
Summit Training Source, 1994
Fall protection: The basics
Number: VT01537
Material: video, 11 minutes
Industry: all industries
This humorous video covers engineering controls such as guardrails, barriers, and nets; and
personal fall arrest systems including body harnesses, lifelines, lanyards, and anchorages
Industrial Training Systems, 1996
Farm & ranch safety management by Stan Anthony
Number: S565.A58
Material: book, 231 pages
Industry: agriculture
Provides safety guidelines to help farmers/ranchers identify and eliminate agricultural safety
hazards.
Delmar Publishers, 1995
Farmstead safety: Do it everyday!
Number: VT01542
Material: video, 7 minutes
Industry: agriculture
Focuses on hazards and safety measures including machinery and equipment, grain storage, and
housekeeping.
Kansas State University, 1994
Fire extinguisher operation: Construction
Number: VT01568
Material: video, 5 minutes
Industry: construction
Discusses classes of fires, types of fire extinguishers, inspection, operation, and location on
the jobsite for visibility and accessibility.
Assoc General Contractors of America, 1995
Fire extinguisher safety
Number: VT01391
Material: video, 11 minutes
Industry: general industry
Discusses knowing your company’s fire escape plan, finding out where fire extinguishers are
located at your worksite, the four classes of fires, types of fire extinguishers, and their proper
use.
CoreMedia Training, 1996
Fire extinguisher training
Number: VT01373
Material: video, 5 minutes
Industry: all industries
Covers fire extinguisher basics, types of fire extinguishers, the four classes of fires, and
proper use techniques.
Digital 2000, 1993
Fire extinguishers
Number: VT01507
Material: video, 5 minutes
Industry: all industries
Covers the classification of fire extinguishers, the type of fire for which they are suited, and
their proper use.
Summit Training Source, 1990
Fire prevention: Construction
Number: VT01578
Material: video, 12 minutes
Industry: construction
Discusses fire hazards and prevention on the job site including proper storage of flammables,
safety cans, electrical safety, good housekeeping practices, and the types and use of fire
extinguishers.
Digital 2000, 1992
Fire safety
Number: VT01551
Material: video, 15 minutes
Industry: general industry
Presents the elements of combustion, the classes for fire, fire hazards commonly found in the
workplace, types and use of fire extinguishers, and evacuation procedures.
J.J. Keller & Associates, 1993
Fire safety: Don't get burned
Number: VT01721
Material: video, 10 minutes
Industry: roofing and siding
Covers fire hazards and burn prevention by illustrating the correct use of kettles,
tankers, LP gas tanks and torches, as well as proper emergency first-aid techniques.
National Roofing Contractors Assoc, 1990
Fire safety: Real, real-life
Number: VT01559
Material: video, 15 minutes
Industry: all industries
This humorous video covers all of the important essentials of fire safety through reenactments of
fire situations, and discusses the elements and classes of fire, fire prevention, fire
extinguishers, emergency action plans.
Coastal Training, 1998
Fire safety: There's no second chance
Number: VT01460
Material: video, 20 minutes
Industry: general industry
Re-creates a workplace fire and discusses the elements and classes of fire, fire prevention,
emergency action plans, types of fire extinguishers and their use.
Coastal Training, 1996
Fire! Getting out alive
Number: VT01524
Material: video, 18 minutes
Industry: general industry
Discusses how to prepare for a fire emergency including exit posting and egress, fire drills,
emergency evacuation plans, and employee fire education and preparation training.
Safe Expectations, 1995
Fire! In the workplace
Number: VT01440
Material: video, 17 minutes
Industry: general industry
Covers the recognition of potential hazards, the fire triangle, classes of fires, fire
extinguisher use, and how to extinguish small fires.
Coastal Training, 1989
Flammable liquids
Number: VT01305
Material: video, 7 minutes
Industry: general industry
Covers the characteristics of, hazards of, and proper handling and storing of flammable liquids.
Summit Training Source, 1990
Foot protection
Number: VT01374
Material: video, 5 minutes
Industry: all industries
Discusses types of hazardous situations found on the job, foot injuries and the importance of
wearing appropriate safety shoes and boots.
Digital 2000, 1993
Foot protection: Safety gear
Number: VT01519
Material: video, 11 minutes
Industry: all industries
Explains how the foot works, workplace hazards to feet, classification of safety shoes, and the
function of toe shields, metatarsal guards, and puncture-resistant soles.
Aims Multimedia, 1989
Foot protection: Safety gear
Number: VT01728Spanish
Material: video, 11 minutes
Industry: all industries
See previous description.
Aims Multimedia, 1989
Forklift case histories: Serious business
Number: VT01449
Material: video, 18 minutes
Industry: general industry
Shows re-enactments of real-life forklift accidents, demonstrates the dangers of improper use, and
discusses safe work practices, securing the platform and load, lifting, safe speed and turning,
and awareness of surroundings.
Assoc General Contractors of America, 1992
Forklift driving skills
Number: VT00368
Material: video, 5 minutes
Industry: general industry
Describes techniques for driving on wet, rough and inclined surfaces and proper procedures for
load handling.
Summit Training Source, 1990
Forklift fundamentals: Get the facts
Number: VT01594
Material: video, 18 minutes
Industry: general industry
Covers powered industrial truck design, controls and instrumentation, pre-operation safety
inspection, the vehicle stability triangle and the factors that affect it.
Coastal Training, 1997
Forklift load capacity
Number: VT01654
Material: video, 5 minutes
Industry: general industry
Demonstrates proper load balance and weight capacity, the importance of the three-point suspension
system and the effect of the stability triangle.
Summit Training Source, 1990
Forklift operations: Carry the load
Number: VT01595
Material: video, 19 minutes
Industry: general industry
Discusses operating conditions and hazards including surface conditions, lifting and putting down
the load, load stability, traveling tips, working with stacks, special hazards, operating safety,
vehicle and pedestrian traffic.
Coastal Training, 1999
Forklift pedestrian safety
Number: VT01760
Material: video, 10 minutes
Industry: general industry
This dramatic video is intended for people on foot who work in areas where forklifts are being
used.
WA State Dept of Labor & Industries, 2003
Forklift pre-operation inspection
Number: VT01655
Material: video, 5 minutes
Industry: general industry
covers the pre-operation inspection checklist, proper forklift maintenance, and basic forklift
features.
Summit Training Source, 1990
Forklift safe driving
Number: VT00371
Material: video, 5 minutes
Industry: general industry
Demonstrates how accidents occur and safe driving techniques.
Summit Training Source, 1990
Forklift safe driving skills: The responsible operator
Number: VT01296
Material: video, 14 minutes
Industry: general industry
Discusses hazard awareness and safety procedures, driving skills, interaction with pedestrian
traffic, proper load handling and lifting, and techniques for driving on various surfaces such as
ramps, inclines and dock plates.
Summit Training Source, 1995
Forklift safety: Loads of experience
Number: VT01392
Material: video, 15 minutes
Industry: general industry
Focuses on the responsibilities of pedestrians who are working around lift trucks to prevent
accidents including eye contact with the driver, safe distance, safe work zone, and safe drop
zone.
CoreMedia Training, 1990
Forklift safety: On the go
Number: VT01584
Material: video, 17 minutes
Industry: construction
This video on extended reach forklifts discusses pre-operation inspection, vehicle center of
balance, load capacities, and safe operation including lifting, moving, and stacking loads.
Assoc General Contractors of America, 1994
Forklift Safety: The Color of Danger
Number: VT01526
Material: video 17 minutes
Industry: general industry
This award winning video uses re-enactments of actual accidents to show the consequences of a
lapse in concentration or safe driving procedures in various industrial settings including docks
and warehouses.
Allied Digital Technologies, 1982.
Forklift walk-behinds
Number: VT00372
Material: video, 5 minutes
Industry: general industry
Covers the safe operation of handtrucks including pre-operation inspection and load capacity.
Summit Training Source, 1990
Forklifts and pedestrians
Number: VT00373
Material: video, 5 minutes
Industry: general industry
Uses live-action accident scenarios to show how serious forklift accidents involving pedestrians
can be prevented.
Summit Training Source, 1990
Formaldehyde
Number: VT01625
Material: video, 14 minutes
Industry: general industry
Discusses health hazards and routes of entry into the body, hazard communication, personal
protective equipment, and safe work practices.
Summit Training Source, 1995
From here to there: Moving things by hand
Number: VT01523
Material: video, 13 minutes
Industry: all industries
Presents the fundamentals of manual materials handling including sizing up the item to be moved,
proper lifting techniques, and the use of handcarts and trucks.
Safe Expectations, 1978
G
Gas cylinders: Handling and storing
Number: VT01401
Material: video, 7 minutes
Industry: general industry
Shows the proper storage and handling procedures for many types of gases contained in cylinders.
Summit Training Source1990
Gas welding and cutting operations: Construction
Number: VT01579
Material: video, 14 minutes
Industry: construction
Explains basic safety procedures and health hazards including equipment inspection, cylinder
connections, valves, fire prevention, and metal fume fever.
Digital 2000, 1993
Gas welding and cutting operations: Construction
Number: VT01711 Spanish
Material: video, 14 minutes
Industry: construction
See previous description.
Digital 2000, 1993
Grain elevator safety orientation
Number: VT01709
Material: video, 14 minutes
Industry: agriculture
Demonstrates safe work practices including the use of PPE, electrical safety, ladder safety, slip
hazards, truck and wagon grain unloading, entering grain bins, engulfment hazards, and grain dust
explosion causes
IL Onsite S&H Consultation Program, 2001
Grinding
Number: VT01402
Material: video, 7 minutes
Industry: general industry
Discusses engineering controls, proper personal protective equipment, and techniques of safe
grinding operations.
Summit Training Source, 1990
Grinding safety: The rule of Muldoon
Number: VT00526
Material: video, 17 minutes
Industry: general industry
This humorous video covers grinding wheel speeds, guards, mounting procedures, and wheel operating
rules.
Grinding Wheel Institute, 1985
Ground skidding
Number: VT01257
Material: video, 11 minutes
Industry: logging
This video, developed for Pacific Northwest logging, covers the basic safety procedures of ground
skidding.
University of Idaho, 1992
Groundskeeping safety: Be a pro!
Number: VT01489
Material: video, 17 minutes
Industry: general industry
Covers hazards and safety procedures for employees responsible for grounds or outdoor maintenance
when using chemicals and equipment including basic PPE, tractors, riding mowers, brush-cutting
equipment and blowers.
Coastal Training, 1997
H
Hand and arm protection: Safety gear
Number: VT01520
Material: video, 11 minutes
Industry: all industries
Covers how to recognize workplace hand and arm hazards, the causes of traumatic and contact
injuries, the reason for and use of guards on equipment and machinery, and choosing the proper
gloves for the job.
Aims Multimedia, 1989
Hand and arm protection: Safety gear
Number: VT01729 Spanish
Material: video, 11 minutes
Industry: all industries
See previous description.
Aims Multimedia, 1989
Hand and power tool safety
Number: VT01283
Material: video, 7 minutes
Industry: all industries
Discusses the common hand and power tools involved in accidents including wrenches, drills and
handsaws.
Training Network-LIP, 1992
Hand and power tool safety
Number: VT01284
Material: video, 16 minutes
Industry: all industries
This humorous video reviews the basics of using tools including proper use, choosing the right
tool for the job, inspection, and tool related accidents.
Training Network-LIP, 1991
Hand and power tool safety
Number: VT01384
Material: video, 12 minutes
Industry: all industries
Covers general safety rules and proper techniques when using cutting, striking, and power tools
including using the right tool for the job, storage and inspection, avoiding kickbacks, and PPE.
Training Network-LIP, 1994
Hand and power tool safety
Number: VT01598
Material: video, 13 minutes
Industry: all industries
Discusses good safety attitudes and proper techniques as the key to injury-free use of hand and
powers tools including wrenches, power drills and saws.
Training Network-LIP, 1996
Hand and power tool safety: Construction
Number: VT01379
Material: video, 13 minutes
Industry: construction
Discusses tool care and inspection, grounding, and general safety rules including using the proper
tool for the
Digital 2000, 1992
Hand and power tool safety: Construction
Number: VT01500 Spanish
Material: video, 13 minutes
Industry: construction
See previous description.
Digital 2000, 1992
Hand and power tools
Number: VT01376
Material: video, 5 minutes
Industry: all industries
Covers general safety rules when using hand and power tools including wrenches.
Digital 2000, 1993
Hand safety
Number: VT00376
Material: video, 6 minutes
Industry: general industry
Covers the causes of hand injuries and prevention including the proper use of hand tools, knife
safety, working with machinery and pinch points.
Summit Training Source, 1990
Hand tool safety overview: Give safety a hand
Number: VT01441
Material: video, 15 minutes
Industry: all industries
Provides an introduction to hand tool safety including basic safety procedures, safe work
practices, and proper use of wrenches, hammers, and screw drivers.
Coastal Training, 1994
Hand/arm vibration syndrome
Number: VT01270
Material: video, 25 minutes
Industry: all industries
Covers the cause, symptoms, assessment, and treatment of this cumulative trauma disorder.
US National Institute for OSH, 1990
Hazard communication
Number: VT01668
Material: video, 13 minutes
Industry: general industry
Reviews the differences between common hazardous materials, proper storage, labeling systems,
material safety data sheets, exposure reduction, and safe handling procedures.
Summit Training Source, 1998
Hazard communication in manufacturing
Number: VT01285
Material: video, 5 minutes
Industry: general industry
Discusses material safety data sheets, labeling, handling and safe use of chemicals in the
workplace.
Training Network-LIP, 1992
Hazard communication standard 1926.59
Number: VT01243
Material: video, 14 minutes
Industry: construction
Discusses chemical hazards in construction including materials safety data sheets, container
labeling, employee training, and the requirements of the standard.
OSHA Office of Training and Education, 1993
Hazard communication training: The toxic time bomb
Number: VT01166
Material: video, 15 minutes
Industry: construction
Discusses construction chemical hazards including hazard awareness, safe chemical handling
procedures, employee right-to-know, and how to read labels and material safety data sheets.
Florida AFL-CIO United Labor Agency, 1988
Hazard communication: The message is construction safety
Number: VT01583
Material: video, 14 minutes
Industry: construction
Covers construction chemical hazards including types of hazardous materials found on the jobsite,
reading product labels and material safety data sheets, safe handling procedures, and the
requirements of the standard.
Assoc General Contractors of America, 1997
Hazard communication: Training for employees
Number: VT01660
Material: video, 18 minutes
Industry: general industry
Covers chemical safety, the importance of keeping an up-to-date hazardous chemical inventory, how
to read MSDSs, labeling of containers, what an employee should do if they find an unlabeled
container or no MSDS on a substance, and written hazcom programs.
J.J. Keller & Associates, 2000
Hazard communication: Training for employees
Number: VT01662 Spanish
Material: video, 18 minutes
Industry: general industry
See previous description.
J.J. Keller & Associates, 2000
Hazard communication: Your right to know
Number: VT01722
Material: video, 12 minutes
Industry: roofing and siding
Explains how to use material safety data sheets, labeling procedures for hazardous materials, and
safety precautions.
National Roofing Contractors Assoc, 1990
Hazard communication: Your safety net
Number: VT01665
Material: video, 14 minutes
Industry: general industry
Focuses on chemical hazards and safety precautions including exposure situations, ways to control
chemical hazards, and reading and using material safety data sheets and warning labels.
Coastal Training, 2000
Hazard recognition
Number: VT01737
Material: video, 5 minutes
Industry: general industry
Covers the skills and techniques for recognizing common types of hazards found in the workplace.
Summit Training Source1990
Hazard recognition: Out of the ordinary
Number: VT01667
Material: video, 13 minutes
Industry: general industry
Covers how to identify potential hazards in the workplace through work area inspection and common
hazards including contact with objects and equipment, improper lifting, falls, exposure to harmful
substances.
Summit Training Source, 2000
HazCom case histories: Learn from their mistakes
Number: VT01442
Material: video, 20 minutes
Industry: all industries
Using re-enactments of real-life HazCom incidents, covers the importance of following safe work
practices, reading material safety data sheets and warning labels, emergency response, and using
personal protective equipment.
Coastal Training, 1994
HazCom for construction
Number: VT01461
Material: video, 12 minutes
Industry: construction
Covers the dangers of working with and around chemicals, how to recognize construction site
chemical hazards, hazard control, safety precautions and personal protective equipment.
Coastal Training, 1995
HazCom: Understanding labels
Number: VT01245
Material: video, 8 minutes
Industry: construction
Discusses the importance of labels on hazardous materials, how to read them, and various types of
labeling systems including that of the National Fire Protection Association which uses color
coding to distinguish classes of hazards.
Laborers' National H&S Fund, 1993
HazCom: Understanding MSDS
Number: VT01246
Material: video, 19 minutes
Industry: construction
Discusses the eight sections required on
material safety data sheets including
health hazards and exposure prevention.
Laborers' National H&S Fund, 1993
HazCom: Using MSDS
Number: VT01538
Material: video, 12 minutes
Industry: general industry
This humorous video provides a basic overview of a typical material safety data sheet, how to read
and use them, and the reasons to consult a MSDS when working with hazardous chemicals.
Industrial Training Systems, 1996
HAZWOPER training: Awareness level
Number: VT01490
Material: video, 20 minutes
Industry: general industry
Designed for all employees, discusses the
standard, hazardous materials definitions, and the
activities and workers covered by the standard.
Coastal Training Technologies, 1990
Head protection: Hard hats
Number: VT01375
Material: video, 5 minutes
Industry: construction
Covers hardhat construction, how hard hats work and the importance of wearing head protection on
the job.
Digital 2000, 1993
Head protection: Safety gear
Number: VT01521
Material: video, 10 minutes
Industry: all industries
Examines the features and benefits of wearing hard hats including how the suspension system works,
adjustment, regular inspection, and maintenance.
Aims Multimedia, 1989
Head protection: Safety gear
Number: VT01730Spanish
Material: video, 10 minutes
Industry: all industries
See previous description.
Aims Multimedia, 1989
Health & safety Why care?
Number: VT01173
Material: video, 14 minutes
Industry: general industry
Presents an overview of potential hazards and safety precautions for retail, wholesale and
department store employees.
Retail, Wholesale and Dept Store Union, 1991
Health & safety Why care?
Number: VT01173SSpanish
Material: video, 14 minutes
Industry: general industrySee previous description.
Retail, Wholesale and Dept Store Union, 1991
Health and safety in welding and allied processes by Nigel C. Balchin
Number: TS227.8H
Material: book, 231 pages
Industry: all industries
Identifies the hazards of major welding processes including gas welding, arc welding, brazing and
soldering.
McGraw-Hill, 1993
Healthcare electrical safety
Number: VT01561
Material: video, 18 minutes
Industry: health services
Discusses the common hazards of using electrical monitoring and diagnostic equipment typical to
the healthcare setting, basic electrical principles, and electrical safety guidelines.
Coastal Training, 1991
Healthcare ergonomics
Number: VT01562
Material: video, 21 minutes
Industry: health services
Covers cumulative trauma disorders and contributing factors, identifying hazards, proper lifting
body mechanics, lifting and transferring of patients, workstation adjustments, and exercises.
Coastal Training, 1996
Healthcare PPE
Number: VT01563
Material: video, 19 minutes
Industry: health services
Covers types of PPE available to healthcare workers and how they work, how to identify hazards
such as infectious and chemical, selection of PPE, proper use and removal, inspection and
disposal.
Coastal Training, 1995
Healthcare safety orientation
Number: VT01564
Material: video, 16 minutes
Industry: health services
Gives employees an overview of workplace hazards and safety measures including slips and falls,
back injuries, handling medical waste, chemicals, radiation, and the proper use of personal
protective equipment.
Coastal Training, 1994
Hearing
Number: VT00377
Material: video, 5 minutes
Industry: general industry
Explains how the ear operates, the effects of noise, and the use of earmuffs and earplugs to
prevent hearing loss.
Summit Training Source, 1990
Hearing conservation on the jobsite: Sound advice
Number: VT01424
Material: video, 13 minutes
Industry: construction
Discusses noise on the jobsite and the reason for wearing hearing protection.
Assoc General Contractors of America, 1995
Hearing conservation: An employee review
Number: VT01273
Material: video, 9 minutes
Industry: all industries
Discusses control of harmful noise, hearing protection, and noise-induced hearing loss.
VA Medical Center, 1991
Hearing protection: Safety gear
Number: VT01731Spanish
Material: video, 13 minutes
Industry: general industry
Explains how the ear works, workplace noise hazards, the effects of noise, and the use of hearing
protection including earmuffs and earplugs.
Aims Multimedia, 1989
Hearing safety
Number: VT00146
Material: video, 18 minutes
Industry: general industry
Stresses the hazards of both short- and long-term exposure to common levels of industrial noise,
and the correct use of various protective devices.
Primedia Workplace Learning, 1986
Heat stress
Number: VT01634
Material: video, 5 minutes
Industry: all industries
Covers the effects of heat on the body, health hazards and their symptoms, and preventive
measures.
Summit Training Source, 1990
Heat stress prevention
Number: VT01297
Material: video, 10 minutes
Industry: all industries
Discusses the dangers of excessive heat exposure, how the body reacts in high temperatures, and
precautions to take to guard against heat stroke and
Summit Training Source, 1989 |
Heat stress: Don't lose your cool
Number: VT01666
Material: video, 15 minutes
Industry: all industries
Discusses how to prevent or treat heat disorders including work procedures, fluid intake, eating
habits, clothing, and acclimatization.
Coastal Training, 2000
Highway work zone safety: Work zone ahead
Number: VT01693
Material: video, 12 minutes
Industry: construction
Provides basic safety training to road construction workers.
Assoc General Contractors of America, 1996
HIV in the research laboratory
Number: VT01748
Material: video, 28 minutes
Industry: general industry
Identifies causes of laboratory-acquired infections and safety practices to protect against HIV.
Howard Hughes Medical Institute, 1994
Hoists and slings
Number: VT01635
Material: video, 14 minutes
Industry: all industries
Covers various types of hoists and slings, factors to consider when choosing a hoist or sling,
safety practices, inspection procedures, proper care and storage.
Summit Training Source, 2000
Hot work permit
Number: VT01298
Material: video, 13 minutes
Industry: all industries
Discusses proper procedures and safe work practices when performing hot work (welding, cutting,
grinding) including identifying potential hazards including fires and explosions, permit
procedures, and personal protective equipment.
Summit Training Source, 1996
Hot work: Welding and cutting safety in construction
Number: VT01414
Material: video, 14 minutes
Industry: construction
Covers safe work practices and procedures for gas and arc welding and cutting operations including
recognizing hazards, personal protective equipment, and equipment inspection.
Assoc General Contractors of America, 1994
Housekeeping
Number: VT00379
Material: video, 6 minutes
Industry: general industry
Discusses how proper housekeeping can reduce accidents including slips and falls and prevent
fires.
Summit Training Source, 1990
Housekeeping on the jobsite
Number: VT01317
Material: video, 10 minutes
Industry: construction
Discusses how good housekeeping can prevent accidents on the construction site including slips and
falls.
Digital 2000, 1995
Housekeeping on the jobsite: The winning ticket
Number: VT01707Spanish
Material: video, 13 minutes
Industry: construction
Explains the dangers of working on cluttered jobsites including slips and falls.
Assoc General Contractors of America, 1991
Housekeeping responsibilities
Number: VT01648Spanish
Material: video, 5 minutes
Industry: all industries
Covers how good housekeeping can prevent accidents and fires including spill cleanup and oily rag disposal.
Training Network-LIP, 1994
Housekeeping: A matter of attitude
Number: VT01525
Material: video, 16 minutes
Industry: all industries
This humorous video points out the impacts of sloppy housekeeping and why good housekeeping is an
important aspect of safety because it can prevent accidents.
Safe Expectations, 1981
Housekeeping: It ain't like in the movies
Number: VT01530
Material: video, 15 minutes
Industry: all industries
This humorous video, an action adventure spoof, reviews the importance of preventing accidents
through good housekeeping techniques including proper tool storage and eliminating
Coastal Training, 1995
How far is that fall?
Number: VT01511
Material: video, 22 minutes
Industry: construction
Covers fall distance calculations for personal fall arrest systems as found in OSHA regulation
1926.502(d)(16).
OSHA Office of Training and Education, 1998
How to investigate an accident
Number: VT01581
Material: video, 13 minutes
Industry: all industries
Presents the basics of accident investigation including interviewing witnesses, fact gathering,
analyzing data, and the points to remember when completing an accident report.
Digital 2000, 1999
Hypothermia
Number: VT01604
Material: video, 7 minutes
Industry: all industries
Discusses how to recognize the warning signs and how to prevent it including wearing the proper
cold-weather PPE.
Summit Training Source, 1998
I
Incident investigation
Number: VT01299
Material: video, 17 minutes
Industry: all industries
Provides training on the methods and techniques required to discover the accurate cause of an
incident including physical evidence, fact finding, data gathering, interviewing witnesses,
analyzing details, and effective corrective actions.
Summit Training Source, 1995
Indoor cranes: Safe lifting operations
Number: VT01602
Material: video, 19 minutes
Industry: general industry
Covers how to safely operate shop-operated power hoist equipment and discusses pre-operation
safety inspections, basic rigging techniques, and lifting and moving the load.
Coastal Training, 1991
Industrial ventilation: a practical overview
Number: VT01188
Material: video, 22 minutes
Industry: general industry
Discusses the principles of industrial ventilation to control the buildup of hazardous industrial
chemicals in the air.
OSHA Office of Training and Education, 1991
Introduction to scaffolding safety
Number: VT01597
Material: video, 22 minutes
Industry: construction
Discusses scaffold erection, hazards, and safe work practices.
National Ironworkers Training Fund, 1999
Ironworkers: A study of hazards in the construction industry
Number: VT01098
Material: video, 25 minutes
Industry: structural steel
Discusses jobsite hazards and safety precautions including ladders, scaffolds, rigging, setting
beams, bolting and welding. NOTE: Body belts are no longer acceptable as part of a personal fall
arrest system.
Florida AFL-CIO United Labor Agency, 1987
Is it worth your life? Workplace violence prevention
Number: VT01262
Material: video, 19 minutes
Industry: retail trade
This video shows ways to prevent or defuse violent situations in retail stores. NOTE: Washington
State has a Crime Prevention Code. OSHA uses the General Duty Clause to cover this workplace
hazard.
WA State Dept of Labor & Industries, 1992
It can happen here: Chemical disasters
Number: VT01171
Material: video, 5 minutes
Industry: chemical
Describes the causes of toxic releases and explosions at chemical plants.
Intl Chemical Workers Union, 1989
It only takes a second…
Number: VT01682
Material: video, 4 minutes
Industry: all industries
This powerful video shows, through work and driving accident re-enactments, how easily accidents
can happen and the consequences of not taking the time to think safety.
Aurora Pictures, 1995
It's a wonderful kitchen: Injury prevention for food service workers
Number: VT01496
Material: video, 12 minutes
Industry: food service
Identifies the most common food service-related injuries and methods of prevention including slips
and falls, burns and scalds, and cuts.
NY State Dept of Health, 1991
J
Job hazard analysis: A guide to identifying risks in the workplace by George Swartz
Number: T55.S93
Material: book, 205 pages
Industry: all industries
Provides a step-by-step guide to identifying and preventing occupational hazards on the job.
Government Institutes, 2001
Job safety analysis
Number: VT01752
Material: video, 10 minutes
Industry: all industries
Offers an overview of job safety analysis including how to identify the hazards which are
associated with each job step and identifying the proper way of doing the job.
IL Onsite S&H Consultation Program, 2000
Job safety analysis for construction: Step-by-step
Number: VT01572
Material: video, 14 minutes
Industry: construction
Discusses the elements of the job safety analysis process used for planning work, and identifying
and controlling potential job site hazards.
Assoc General Contractors of America, 1993
Jobsite hazardous waste safety: handle with care
Number: VT01411
Material: video, 17 minutes
Industry: construction
Reviews the proper way to handle the unexpected discovery of hazardous waste on the jobsite
including stop work, notifying the designated person, and securing the site.
Assoc General Contractors of America, 1992
Jobsite safety inspection: Controlling the field
Number: VT01582
Material: video, 13 minutes
Industry: construction
Discusses how to conduct jobsite safety inspections, developing and using safety checklists,
identifying and eliminating hazards, follow-up on problem areas, and employee training.
Assoc General Contractors of America, 1991
L
Lab safety: Assessing risks of toxic chemicals
Number: VT01747
Material: video, 11 minutes
Industry: general industry
Covers risk assessment, determining a chemical’s inherent toxicity, potential routes of exposure,
acute versus chronic toxicity, duration and frequency of exposure.
Howard Hughes Medical Institute, 1994
Lab safety: Chemical hazards
Number: VT01744
Material: video, 10 minutes
Industry: general industry
Demonstrates safe work practices and procedures that apply when working with hazardous chemicals.
Howard Hughes Medical Institute, 1994
Lab safety: Chemical storage hazards
Number: VT01746
Material: video, 11 minutes
Industry: general industry
Reviews the basic principles of safe chemical storage for organic and inorganic chemicals, acids,
bases, flammables, toxics, caustics, oxidizers, and corrosives.
Howard Hughes Medical Institute, 1994
Lab safety: Emergency response
Number: VT01745
Material: video, 12 minutes
Industry: general industry
Addresses fire, personal injuries, and radiation, chemical and biological spills and demonstrates
proper safety procedures.
Howard Hughes Medical Institute, 1994
Lab safety: Handling hazardous chemicals
Number: VT01689
Material: video, 21 minutes
Industry: general industry
Discusses the requirements of the Laboratory Safety Standard, hazard identification, exposure
monitoring and PELs, recordkeeping, and emergency procedures.
Coastal Training, 1990
Lab safety: Practicing safe science
Number: VT01743
Material: video, 29 minutes
Industry: general industry
Demonstrates safe practices, features reenactments of actual laboratory accidents, and poses
questions to help the viewer recognize risks associated with scientific protocols.
Howard Hughes Medical Institute, 1994
Lab safety: Under the hood
Number: VT01603
Material: video, 18 minutes
Industry: general industry
Discusses safe work practices, how to recognize common laboratory chemical and health hazards,
laboratory hoods, how to use a Chemical Hygiene Plan and emergency procedures.
Coastal Training, 1998
Ladder safety
Number: VT01508
Material: video, 6 minutes
Industry: all industries
Covers selecting the proper ladder for the job, inspection, truck racks, and proper set-up and
use.
Summit Training Source, 1990
Ladder safety: Construction
Number: VT01381
Material: video, 5 minutes
Industry: construction
Explains safe use requirements for ladders including proper set-up, inspection, 4:1 ratio, and
climbing techniques.
Training Network-LIP, 1994
Ladder safety: Construction
Number: VT01570
Material: video, 6 minutes
Industry: construction
Covers the safe use of ladders including inspection, 4:1 pitch ratio, the 3-point rule, safe
climbing techniques, and job-made ladders.
Assoc General Contractors of America, 1992
Ladder safety: Construction
Number: VT01672Spanish
Material: video, 6 minutes
Industry: construction
See previous description.
Assoc General Contractors of America, 1992
Ladder safety: Fall prevention
Number: VT01545
Material: video, 12 minutes
Industry: all industries
Explains the principles of ladder selection, inspection, set-up and use, and safe climbing
techniques.
Primedia Workplace Safety, 1993
Ladder safety: Step right up
Number: VT01279
Material: video, 19 minutes
Industry: general industry
This humorous video demonstrates safety tips and procedures when using portable ladders including
carrying, inspection, erecting, securing, and climbing.
Coronet/MTI Film & Video, 1981
Landing safety
Number: VT01251
Material: video, 18 minutes
Industry: logging
This logging video discusses safety measures to be taken at landing areas.
University of Idaho, 1992
Large power hand tool safety
Number: VT01617
Material: video, 10 minutes
Industry: all industries
Covers safety risks and precautions that should be observed when working with the impact wrench,
large power drills, portable band saws, and the roto
Aims Multimedia, 1991
Laser safety: Construction
Number: VT01673
Material: video, 8 minutes
Industry: construction
Covers the use of lasers in construction, the four classes of lasers, the hazards of laser light,
proper eye protection, and safe operating practices including the posting of warning signs.
Assoc General Contractors of America, 1997
Lead abatement: Safe practices
Number: VT01261
Material: video, 26 minutes
Industry: construction
Discusses lead hazards and ways of preventing exposure in the construction industry.
Laborers-AGC Education and Training Fund, 1995
Lead exposure in construction: Caution!
Number: VT01705
Material: video, 11 minutes
Industry: construction
Discusses sources of lead exposure, lead poisoning symptoms, protective measures, and the hazards
of lead in the construction industry.
Western Consortium for Public Health, 1993
Lead exposure in construction: Exposing the facts
Number: VT01705
Material: video, 17 minutes
Industry: construction
Describes how lead is used in the construction industry, its effects on the human body, and how
workers can protect themselves from overexposure.
Assoc General Contractors of America, 1992
Lead safety in the demolition industry
Number: VT01260
Material: video, 15 minutes
Industry: wrecking and
Discusses lead exposure, its health effects, and
ways of preventing exposure
National Assoc of Demolition Contractors, 1994
Lead safety in the demolition industry
Number: VT01266Spanish
Material: video, 15 minutesIndustry: wrecking and See previous description.
National Assoc of Demolition Contractors, 1994
Lead safety on the construction site: Employee
Number: VT01236
Material: video, 29 minutes
Industry: construction
Discusses lead hazards, health effects, sources of lead exposure, medical surveillance,
engineering and work practice controls, and abatement procedures.
Chicago Construction Safety Council, 1993
Lead safety on the construction site: Employer
Number: VT01237
Material: video, 26 minutes
Industry: construction
Covers compliance programs, lead hazards, health effects, exposure assessment, control measures,
OSHA requirements, recordkeeping requirements, and safety program evaluation.
Chicago Construction Safety Council, 1993
Lead standard
Number: VT01661
Material: video, 6 minutes
Industry: all industries
Discusses how lead enters the body, the health hazards associated with overexposure, safety
procedures, and preventive measures.
Summit Training Source, 1996
Lead: Treat it with respect
Number: VT01463
Material: video, 17 minutes
Industry: construction
Discusses the dangers of lead hazards in construction, how lead enters the body, exposure limits,
PPE, housekeeping, and medical surveillance.
Coastal Training, 1993
Lifting safely: Construction
Number: VT01318
Material: video, 12 minutes
Industry: construction Explains how the back functions, safe lifting methods, and how to prevent
back injuries.
Digital 2000, 1993
Line breaking: Use a permit
Number: VT01443
Material: video, 16 minutes
Industry: chemical
Discusses the dangers involved in not following process system safety procedures including line
and equipment opening (LEO), LEO permits, lockout/tagout, line-breaking procedures and post
procedures, and emergency response.
Coastal Training, 1992
Line skidding
Number: VT01252
Material: video, 16 minutes
Industry: logging
Covers safety procedures for skidding with a gravity yarder.
University of Idaho, 1992
Loading and hauling
Number: VT01253
Material: video, 17 minutes
Industry: logging
Discusses safety procedures for drivers and loader operators during the loading and hauling of logs.
University of Idaho, 1992
Lockout for life! Lockout/tagout case histories
Number: VT01444
Material: video, 20 minutes
Industry: general industry
Shows dramatic re-enactments of actual accidents, reviews the hazards of uncontrolled energy,
details correct procedures for locking and tagging, proper equipment shutdown and isolation, and
proper safety procedures.
Coastal Training, 1992
Lockout tragedy: Danger zone
Number: VT01750
Material: video, 15 minutes
Industry: general industry
This high-impact video retells the story of a worker who lost his life in an avoidable accident
involving improper lockout procedures.
Coastal Training, 2001
Lockout/tagout for machine shop employees
Number: VT01239
Material: video, 18 minutes
Industry: general industry
Discusses lockout/tagout procedures for machine shop employees.
National Tooling and Machining Association, 1992
Lockout/tagout for machine shop managers
Number: VT01238
Material: video, 19 minutes
Industry: general industry
Discusses lockout/tagout procedures for machine shop employees.
National Tooling and Machining Association, 1992
Lockout/tagout procedures
Number: VT01306
Material: video, 6 minutes
Industry: general industry
Covers proper procedures for isolating various types of hazardous energy including electrical,
mechanical, hydraulic and pneumatic, and the procedures to take when restarting
Summit Training Source, 1990
Lockout/tagout safety procedures
Number: VT01277
Material: video, 17 minutes
Industry: general industry
Discusses energy control during the maintenance and servicing of equipment. NOTE: Washington State
may have stricter standards than Federal
WA State Dept of Labor and Industries, 1992
Lockout/tagout: Controlling the beast
Number: VT01470
Material: video, 19 minutes
Industry: general industry
Graphically demonstrates the hazards of uncontrolled energy, reviews and explains the purpose of
proper lockout/tagout procedures and the dangers if those procedures are not
Coastal Training, 1994
Lockout/tagout: Real, real-life
Number: VT01608
Material: video, 18 minutes
Industry: general industry
This interactive video covers the when, where and why of lockout including safe work practices,
proper locking/tagging procedures, and spotting potential dangers.
Coastal Training, 2000
Lockout/tagout: Real, real-life
Number: VT01718 Spanish
Material: video, 18 minutes
Industry: general industry
See previous description.
Coastal Training, 2000
Lockout/tagout: safety training for employees
Number: VT01552
Material: video, 15 minutes
Industry: general industry
Provides an overview of the standard and demonstrates proper safety procedures including how to
apply and remove safety devices, the requirements for locks and tags, inspections, recordkeeping,
and maintaining lockout/tagout during shift changes.
J.J. Keller & Associates, 1995
Lockout/tagout: The process of controlling hazardous energy by Edward R. Grund
Number: T55.G77
Material: book, 429 pages
Industry: general industry
Covers safeguards and practices to protect workers when servicing, repairing, adjusting, and
inspecting machinery, equipment, and processes.
National Safety Council, 1995
Logging body mechanics
Number: VT01292
Material: video, 22 minutes
Industry: logging
Discusses the prevention of back injuries for loggers working with chain saws and logging
equipment.
Lumberjack Resource Development Council, 1995
Logging safely in the Intermountain Northwest
Number: VT01254
Material: video, 18 minutes
Industry: logging
Gives an overview of logging operations and safety practices.
University of Idaho, 1992
Long term care safety orientation: Work smart, be safe
Number: VT01753
Material: video, 15 minutes
Industry: health services
Intended as a safety orientation for new employees or as a refresher for current employees who
work in the nursing home industry.
IL Onsite S&H Consultation Program, 2002
M
Machine guarding
Number: VT01307
Material: video, 7 minutes
Industry: general industry
Discusses different types of guards, the importance of not bypassing guards, and the use of guards
in lockout procedures.
Summit Training Source, 1990
Machine guarding
Number: VT01395
Material: video, 16 minutes
Industry: general industry
Provides an overview of machine hazards including point of operation and pinch points, the
necessity and techniques of machine guarding, safety precautions, and guarding devices including
sensors, restraints, pullbacks and gates.
Primedia Workplace Learning, 1989
Machine guarding
Number: VT01445
Material: video, 14 minutes
Industry: general industry
Describes machine hazards, the categories and types of machine guards, the importance of using
guards, the places where machine hazards occur such as pinch points, and safety control devices
including pullbacks and gates.
Coastal Training, 1992
Machine guarding
Number: VT01719 Spanish
Material: video, 14 minutes
Industry: general industry
See previous description.
Coastal Training, 1992
Machine guarding: A management & employee safety |
