Alliance Logo<< Back to Alliance Program Construction Roundtable


Activities and Events Conducted through the Roundtable
(2005 - 2007)
  • November 27-28, 2007: ASSE's New England Chapter Professional Development Conference, Worcester, Massachusetts. John Mroszczyk, ASSE, presented an overview of the 2 to 4 Hour Design for Construction Safety Course.
  • October 18–19, 2007: National Construction Safety Executives Fall Meeting, Williamsburg, Virginia. T. Michael Toole, CI-ASCE, gave a presentation entitled, "Design for Construction Safety."
  • April 11, 2007: 2007 National Association of Occupational Safety and Health Consultation Programs Annual Meeting, Newport, Rhode Island. T. Michael Toole, CI-ASCE; John Mroszczyk, ASSE; and Lee Anne Jillings, then-Director, Office of Outreach Services and Alliances, Directorate of Cooperative and State Programs, USDOL-OSHA; gave presentations to 60 attendees during two workshops entitled, "Designing for Construction Safety: A Discussion of Available Tools & Resources."
  • March 6, 2007: The Southern Company, Birmingham, Alabama. T. Michael Toole and John Gambatese, CI-ASSE, gave a presentation entitled, "Design for Construction Safety."
  • February 14, 2007: Construction Safety Conference 2007; "Design for Construction Safety" Chicago, IL. T. Michael Toole, CI-ASCE; and Walter Jones, Laborers Health and Safety Fund North America; delivered the presentation to 65 attendees.
  • January 24, 2007: 2007 World of Concrete, Las Vegas, Nevada. Stewart Burkhammer, then-Director, Office of Construction Services, Directorate of Construction, USDOL-OSHA, used material from the Design for Construction Safety slide presentation in a speech to 75 attendees.
  • December 6, 2006, ASCE and the National Council for Geo-Engineering and Construction Workshop; "Trends Affecting the Geo-Community: What Does the Future Hold?" Reston, Virginia. T. Michael Toole, CI-ASCE; and Rick Marshall, ADSC: International Association of Foundation Drilling; delivered the presentation to 60 attendees.
  • November 8, 2006: National Safety Congress, San Diego, California. John Mroszczyk, ASSE; T. Michael Toole, CI-ASCE; and Lee Anne Jillings, Director, Office of Outreach Services and Alliances, USDOL-OSHA; gave a presentation to 15 attendees in a workshop entitled, "Safety Through Design: Designing for Construction Worker Safety."
  • September 11, 2006: Construction Users Roundtable Annual Conference, Ypsilanti, Michigan. T. Michael Toole, CI-ASSE, gave a presentation entitled, "Design for Construction Safety."
  • August 30, 2006: Voluntary Protection Program Participants Association, 22nd Annual National Conference, Orlando, Florida. John Mroszczyk, ASSE; Marvin Oey, CI-ASCE; and Lee Anne Jillings, Director, Office of Outreach Services and Alliances, USDOL-OSHA; delivered the presentation to 50 attendees.
  • June 14, 2006: American Society of Safety Engineers (ASSE) Professional Development Conference, Seattle, Washington. John Mroszczyk, ASSE; John Gambatese, CI-ASCE; and Stew Burkhammer, Director, Office of Construction Services, USDOL-OSHA; made the presentation to over 120 attendees in a workshop entitled, "Designing for Construction Worker Safety."
  • February 9, 2006: American Institute of Steel Construction's North American Steel Construction Conference, San Antonio, Texas. T. Michael Toole, CI-ASCE Construction Site Safety Committee, delivered the presentation to over 50 attendees.
  • November 7, 2005: Geo³ Comprehensive Quality Assurance/Quality Control Technical Conference, Dallas, Texas. Bill Nash, Construction Institute - American Society of Civil Engineers (CI-ASCE) Construction Site Safety Committee, gave the presentation to over 100 attendees.


Page last updated: 03/05/2010