An independent pole metal scaffold is a supported scaffold consisting of
a platform(s) resting on cross beams (bearers) supported by ledgers and
uprights independent of support (except ties, guys, braces) from any
structure.
Before reviewing this
section, refer to the
General Scaffolding Requirements.
|
Requirements and Example Solutions |
- Scaffold members must be maintained in good repair and free
of corrosion. [1915.71(d)(1)]
- Vertical and horizontal members must be fastened together with a
coupler or locking device. [1915.71(d)(2)]
- Posts must be kept plumb and rest on an adequate foundation and adequately
braced. [1915.71(d)(3) and
(d)(4)]
- Bearers must be level and installed at each working platform. [1915.71(d)(5)]
- Tubular bracing must be applied where required. [1915.71(d)(6)]
|
Figure 1: Independent metal pole scaffolding. |
Back to Top |
|
|
www.osha.gov
