U.S. Department of Labor
	Occupational Safety & Health Administration
	www.osha.gov		[skip navigational links]	Search	Advanced Search | A-Z Index

The Top Cut The top cut is the first of two cuts that result in an open faced notch.  The notch is made on the side of the tree that faces the direction you want it to fall. The Correct Cut 1. Starting Point Important -- begin at any height as long as you allow enough room for the undercut 2. Angle of Attack Important -- cut downward at an angle of 70 degrees 3. Ending Point Stop when the cut reaches ¼ to 1/3 of the trunk's diameter or when the cut reaches 80% of the tree's diameter at breast height

	Common Incorrect Cuts

Here the top cut is not steep enough resulting in a notch of less than 45 degrees.

Here the bottom cut is not steep enough, resulting in a notch of less than 45 degrees.

	Continue with Lesson 4

Back to Top www.osha.gov		www.dol.gov
Contact Us | Freedom of Information Act | Customer Survey Privacy and Security Statement | Disclaimers
Occupational Safety & Health Administration 200 Constitution Avenue, NW Washington, DC 20210